盾构刀盘参数化建模系统开发

韩伟锋; 李凤远; 王助锋

doi:10.3973/j.issn.1672-741X.2012.02.002

隧道建设 >

2012 , Vol. 32 >Issue 2: 142 - 145

DOI: https://doi.org/10.3973/j.issn.1672-741X.2012.02.002

研究与探索

盾构刀盘参数化建模系统开发

韩伟锋 ,
李凤远 ,
王助锋

展开

(中铁隧道集团有限公司盾构及掘进技术国家重点实验室，郑州 450001)

韩伟锋(1985—)，男，河南许昌人， 2008年毕业于河南科技大学机械设计制造及自动化专业，本科，助理工程师，现从事盾构及掘进技术研究工作。

收稿日期: 2011-11-28

修回日期: 2012-03-05

网络出版日期: 2012-05-03

基金资助

国家973课题（2010CB736008）

收起

Development of Parameterized Modeling System of Cutter Heads of Shield Machines

HAN Wei-Feng ,
LI Feng-Yuan ,
WANG Chu-Feng-

Expand

(State Key Laboratory of Shield Machine and Boring Technology, China Railway Tunnel Group, Zhengzhou 450001, China)

Received date: 2011-11-28

Revised date: 2012-03-05

Online published: 2012-05-03

Fold

摘要

为满足设计人员快速完成盾构刀盘设计，采用CATIA三维建模软件和Visual Basic进行盾构刀盘参数化建模的方法，参照此方法可以完成盾构刀盘参数化建模系统的开发。通过建模系统，根据盾构施工的边界参数、材料参数和刀盘关键参数可快速生成盾构刀盘模型,在一定程度上缩短了刀盘的设计时间，减少了设计人员的劳动强度。

关键词： 盾构; 刀盘; 参数化建模; Visual Basic; CATIA

本文引用格式

韩伟锋 , 李凤远 , 王助锋 . 盾构刀盘参数化建模系统开发[J]. 隧道建设, 2012 , 32(2) : 142 -145 . DOI: 10.3973/j.issn.1672-741X.2012.02.002

Abstract

The parameterized modeling technology for cutter heads of shield machines by means of CATIA 3D modeling software and Visual Basic software is described. The parameterized modeling system of cutter heads of shield machines is developed on basis of the parameterized modeling technology. The model of the cutter heads of shield machines can be rapidly formed by means of the parameterized modeling system and on basis of the boundary parameters, material parameters and cutter head parameters of the shield machines. In this way, the design cycle of the cutter heads is shortened and the working intension of the designers is reduced.

Key words： shield machine; cutter head; parameterized modeling; Visual Basic; CATIA

Options

文章导航

〈

〉

模态框（Modal）标题

摘要

本文引用格式

Abstract