• CSCD核心中文核心科技核心
  • RCCSE(A+)公路运输高质量期刊T1
  • Ei CompendexScopusWJCI
  • EBSCOPж(AJ)JST
二维码
施工技术

盾构被困原因分析及对策

  • 吴朝来 ,
  • 刘金祥
展开
  • (中铁隧道集团有限公司专用设备中心, 河南 洛阳 471009)
吴朝来(1984—),男,青海互助人,2008年毕业于重庆交通大学电气与自动化专业,本科,助理工程师,从事盾构、TBM施工技术管理及维修保养工作。

收稿日期: 2012-08-16

  网络出版日期: 2013-02-19

Analysis on and Countermeasures of Shield Machine Jamming

  • WU Chaolai ,
  • LIU Jinxiang
Expand
  • (Tunnelingdedicated Equipment Center, China Railway Tunnel Group Co., Ltd., Luoyang 471009, Henan, China)

Received date: 2012-08-16

  Online published: 2013-02-19

摘要

为解决土压平衡盾构在硬岩施工中出现被困的问题,以重庆轨道交通六号线二期工程盾构施工过程中4台盾构出现不同程度的被困事故为例,通过设备、地质条件、施工状况3方面分析盾构被困的原因,并结合重庆地区盾构多次脱困的经验,总结出一些解决该问题的对策,防止在硬岩施工中再次出现类似事故而影响项目施工的进度、质量、安全和设备使用寿命等,具有一定的借鉴作用。

本文引用格式

吴朝来 , 刘金祥 . 盾构被困原因分析及对策[J]. 隧道建设, 2012 , 32(增刊2) : 93 -97 . DOI: 10.3973/j.issn.1672-741X.2012.z2.018

Abstract

The jamming causes of 4 shield machines, used in Phase 2 project of Chongqing railway transit line 6, are analyzed in terms of equipment, geological conditions and construction. The countermeasures for shield machine jamming are summarized on basis of study on jamming releasing experiences in Chongqing area, so as avoid similar accidents and to guaranteed construction scheme, quality, safety and using life of equipment. The paper can provide references for similar projects in the future. 

文章导航

/

〈 〉