- CSCD核心中文核心科技核心
- RCCSE(A+)公路运输高质量期刊T1
- Ei CompendexScopusWJCI
- EBSCOPж(AJ)JST
收稿日期: 2012-08-28
修回日期: 2012-11-14
网络出版日期: 2013-03-05
基金资助
国家重点基础研究发展规划项目计划（973计划）（2012CB724308）;国家国际科技合作专项资助（2011DFB71550）
Development of Design System of Cutter Head of Shield Machine
Received date: 2012-08-28
Revised date: 2012-11-14
Online published: 2013-03-05
Supported by
This work was supported by the National Key Basic Research Program (973 Program) under Grant No.2012CB724308；The International Science & Technology Cooperation Program of China under Grant No.2011DFB71550
为快速准确地完成不同类型和尺寸盾构刀盘的设计，根据刀盘自身机械数据结构和施工过程的数据关系，结合刀具破岩机制实验数据和刀盘三维参数化机械模型和结构分析模型，利用VB完成刀盘参数化建模系统的开发，方便了刀盘设计人员准确且快速地完成各种不同地层、不同规格盾构刀盘的设计及分析。
关键词： 盾构; 刀盘; 刀具; 参数化建模; Visual Basic
韩伟锋 , 李凤远 , 陈启伟 . 盾构刀盘设计系统开发[J]. 隧道建设, 2013 , 33(2) : 169 -172 . DOI: 10.3973/j.issn.1672-741X.2013.02.015
The parameterized modeling system of cutter head of shield machine is developed on basis of the relationship between the mechanical data structure of the cutter head of shield machine and the data of the tunneling course, the testing data of the mechanisms of rock breaking by cutting tools, the 3D parameterized mechanical model of cutter head and the structure analysis model, and by means of Visual Basic software, so as to design different types of cutter heads with different dimensions rapidly and accurately. The paper can provide reference for the rapid design of different cutter heads of shield machines tunneling in different geological conditions.
Key words： shield machine; cutter head; cutting tool; parameterized modeling; Visual Basic
/
| 〈 |
|
〉 |