盾构主驱动减速机失效原因分析

常孔磊; 赵新合; 李大伟

doi:10.3973/j.issn.1672-741X.2014.02.015

隧道建设 >

2014 , Vol. 34 >Issue 2: 173 - 177

DOI: https://doi.org/10.3973/j.issn.1672-741X.2014.02.015

施工机械

盾构主驱动减速机失效原因分析

常孔磊 ,
赵新合 ,
李大伟

展开

（中铁隧道集团有限公司专用设备中心，河南洛阳 471009）

常孔磊（1985—），男，河南南阳人，2009年毕业于郑州轻工业学院，机械专业，本科，助理工程师，主要从事盾构和TBM及大型专用设备的技术管理工作。

收稿日期: 2013-10-24

修回日期: 2013-12-19

网络出版日期: 2014-02-27

收起

Analysis on Causes for Failure of Main Drive Reducer of Shield Machine

CHANG Konglei ,
ZHAO Xinhe ,
LI Dawei

Expand

(Tunnelingdedicated Equipment Center, China Railway Tunnel Group Co., Ltd., Luoyang 471009, Henan, China)

Received date: 2013-10-24

Revised date: 2013-12-19

Online published: 2014-02-27

Fold

摘要

为解决盾构法施工中盾构主驱动减速机失效问题，以北京市海淀区500 kV电力隧道工程为依托，结合以往盾构主驱动减速机修复经验，从主电机同步性、故障减速机解体、保险轴断裂及掘进参数等方面进行研究。得到盾构主驱动减速机失效的原因有: 1）掘进参数不合理； 2）二、三级减速机构滚动轴承失效。可为今后盾构法施工及减速机故障处理提供良好的决策依据。

关键词： 盾构; 主驱动减速机; 失效; 原因分析

本文引用格式

常孔磊 , 赵新合 , 李大伟 . 盾构主驱动减速机失效原因分析[J]. 隧道建设, 2014 , 34(2) : 173 -177 . DOI: 10.3973/j.issn.1672-741X.2014.02.015

Abstract

In this paper, the causes for the failure of the main drive reducer of shield machines are studied in terms of 〖HJ2mm〗synchronism of electric motor, disassembly of damaged reducer, break of safety axis and boring parameters of shield machine, with the shield machine for the 500 kV power tunnel in Haidian District in Beijing as an example.The main causes for the failure of the main drive reducer of the shield machine are as follows: 1) Irrational boring parameters; 2) Failure of rolling bearing of the 2nd grade and the tertiary reducers.The paper can provide reference for shield boring and reducer failure treatment in the future.

Key words： shield; main drive reducer; failure; cause analysis

Options

文章导航

〈

〉

模态框（Modal）标题

摘要

本文引用格式

Abstract