TBM刀盘的有限元参数化建模系统开发

潘伶伶; 焦永树; 蔡宗熙

doi:10.3973/j.issn.1672-741X.2015.04.018

隧道建设 >

2015 , Vol. 35 >Issue 4: 382 - 386

DOI: https://doi.org/10.3973/j.issn.1672-741X.2015.04.018

施工机械

TBM刀盘的有限元参数化建模系统开发

潘伶伶 ,
焦永树 ,
蔡宗熙

展开

（1.河北工业大学机械工程学院，天津 300130; 2.天津大学力学系，天津 300072）

潘伶伶（1988—），女，河北沧州人，河北工业大学力学系在读硕士，研究方向为机构与结构仿真分析。

收稿日期: 2014-12-22

修回日期: 2015-02-10

网络出版日期: 2015-04-22

基金资助

国家重点基础研究发展计划资助项目（2013CB035402）

收起

Development of Finite Element Parametric Modeling System for TBM Cutterhead

PAN Lingling ,
JIAO Yongshu ,
CAI Zongxi

Expand

(1. School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China; 2. Department of Mechanics, Tianjin University, Tianjin 300072, China)

Received date: 2014-12-22

Revised date: 2015-02-10

Online published: 2015-04-22

Fold

摘要

针对设计和研究人员快速构建TBM刀盘有限元模型的需求，采用APDL与VC++可视化编程技术相结合的方法，在编制刀盘建模APDL程序的基础上，开发友好的人机交互界面，实现了VC++与ANSYS之间的参数传递，建立了一套可视性良好的TBM刀盘有限元参数化建模系统。以某型号直径4 m TBM刀盘为例构建有限元模型，验证了该系统良好的实用性和可靠性。通过对此建模系统的开发，可实现TBM刀盘数字化建模、分析等全套设计。

关键词： TBM刀盘; 参数化建模; APDL; 有限元; VC++

本文引用格式

潘伶伶 , 焦永树 , 蔡宗熙 . TBM刀盘的有限元参数化建模系统开发[J]. 隧道建设, 2015 , 35(4) : 382 -386 . DOI: 10.3973/j.issn.1672-741X.2015.04.018

Abstract

In order to meet the requirement of rapid establishment of TBM cutterhead finite element model, APDL and VC++ visible programming technology are used, some friendly interactive interfaces are developed, and a series of visualized finite element parametric modeling system is established, as a result, parameters can be transferred between VC++ and ANSYS. Furthermore, a finite element model is established for a 4 mdiameter TBM cutterhead, so as to verify the practicability and reliability of the system. The digitalized modeling, analyzing and design of TBM cutterhead can be realized by using the mentioned system.

Key words： TBM cutterhead; parametric modeling; APDL; finite element; VC++

Options

文章导航

〈

〉

模态框（Modal）标题

摘要

本文引用格式

Abstract