矩形盾构隧道准通用环管片排版技术研究

包鹤立, 姜弘, 潘伟强

doi:10.3973/j.issn.2096-4498.2022.S1.027

隧道建设 >

2022 , Vol. 42 >Issue S1: 232 - 237

DOI: https://doi.org/10.3973/j.issn.2096-4498.2022.S1.027

研究与探索

矩形盾构隧道准通用环管片排版技术研究

展开

（1. 上海市城市建设设计研究总院（集团）有限公司，上海〓200125； 2. 上海隧道工程有限公司，上海〓200032）

包鹤立(1983—)，男，江苏启东人，2011年毕业于美国南加州大学，土木工程专业，硕士，高级工程师，现从事隧道与地下工程设计与研究工作。E-mail： baoheli@sucdri.com。

网络出版日期: 2022-08-23

收起

Research on Layout Technology of Semi-Universal Ring Segments for Rectangular Shield Tunnel

Expand

(1. Shanghai Urban Construction Design & Research Institute (Group) Co., Ltd., Shanghai 200125, China； 2. Shanghai Tunnel Engineering Co., Ltd., Shanghai 200032, China)

Online published: 2022-08-23

Fold

摘要

为解决矩形盾构隧道管片排版拟合任意空间设计曲线这一问题，提出了一种矩形盾构隧道准通用环管片排版技术，采用2种管片形成4种不同姿态拟合平竖设计曲线。利用Visual Lisp语言编制矩形盾构隧道准通用环管片排版程序，在一个500 m小转弯半径工程案例中进行管片预排版并验证其可行性。结果表明： 1）2种管片类型的数量大致相等； 2）拟合后的隧道平曲线与理论平曲线最大偏差为16.6 mm，竖曲线最大偏差为13.2 mm，满足相关规范要求。

关键词： 矩形盾构; 准通用环; 曲线拟合; 管片拼装

本文引用格式

包鹤立, 姜弘, 潘伟强 . 矩形盾构隧道准通用环管片排版技术研究[J]. 隧道建设, 2022 , 42(S1) : 232 -237 . DOI: 10.3973/j.issn.2096-4498.2022.S1.027

Abstract

In order to fit any spatial design curve in the layout of segments for rectangular shield tunnel, a layout technology of semiuniversal ring segments for rectangular shield tunnel is proposed. This technology needs only four positions based on two types of segments to complete the fitting of plan and vertical curves simultaneously. Using Visual Lisp, the composition program of semiuniversal ring segments for rectangular shield tunnel is developed. The technology is applied to the segment prelayout of project with a 500 m radius curve to verify its feasibility. The results show that: (1) The quantity of the two types of segments is almost the same. (2) The maximum deviation between fitted and theoretical horizontal curves is 16.6 mm, and the maximum deviation of the vertical curve is 13.2 mm, which is within the allowace range of standard.

Key words： rectangular shield; semiuniversal ring; curve fitting; segment assembly

Options

文章导航

〈

〉

模态框（Modal）标题

摘要

本文引用格式

Abstract