• CSCD核心中文核心科技核心
  • RCCSE(A+)公路运输高质量期刊T1
  • Ei CompendexScopusWJCI
  • EBSCOPж(AJ)JST
二维码

隧道建设 >

2009 , Vol. 29 >Issue 6: 683 - 688

DOI: https://doi.org/B

经验交流

复杂条件下盾构改造竖井的设计与施工

  • 张兆军 ,
  • 贺善宁
展开
  • 中铁隧道集团有限公司北京铁路地下直径线项目部| 北京100045
张兆军(1975—),1997年毕业于西南交通大学隧道与地下工程专业|学士学位|高级工程师|从事隧道与地下工程施工技术管理工作。

收稿日期: 2009-06-25

  修回日期: 2009-08-03

  网络出版日期: 2010-01-06

Design and Construction of Shield Rehabilitation
Shaft under Complex Environment

  • ZHANG Zhao-Jun ,
  • HE Shan-Ning
Expand
  • Project Management Department of Beijing Rail Underground Transit Line,
    China Railway Tunnel Group, Beijing 100045, China

Received date: 2009-06-25

  Revised date: 2009-08-03

  Online published: 2010-01-06

摘要

针对砂卵石地层条件下大型盾构被困的施工现状,探索在盾构前方开挖异形竖井进行解困的技术方案,结合具体工程,详细阐述了该竖井的设计与施工方法、盾构脱困后的推进方法及竖井回填施工工艺,该项施工技术为大型盾构的脱困提供了经验,可供类似工程参考。

本文引用格式

张兆军 , 贺善宁 . 复杂条件下盾构改造竖井的设计与施工[J]. 隧道建设, 2009 , 29(6) : 683 -688 . DOI: B

Abstract

A large scale shield machine boring in sandcobble ground is jammed and a shaft is constructed ahead of the shield machine for the purpose of shield releasing. The design and construction of the shaft, the boring of the released shield and the backfilling construction of the shaft are presented in the paper, which can provide reference for similar projects in the future.

文章导航

/

〈 〉