基于BIM的预制管片堆场存储与定位研究

doi:10.3973/j.issn.1672-741X.2017.04.013

中国科学引文数据库（CSCD）来源期刊
中文核心期刊中文科技核心期刊
Scopus RCCSE中国核心学术期刊
美国EBSCO数据库俄罗斯《文摘杂志》
《日本科学技术振兴机构数据库（中国）》

隧道建设（中英文） ›› 2017, Vol. 37 ›› Issue (4): 469-475.DOI: 10.3973/j.issn.1672-741X.2017.04.013

基于BIM的预制管片堆场存储与定位研究

田文攀^{1, 2}, 高新闻^{1, 3}, 吴惠明⁴

(1. 上海大学-上海城建建筑产业化研究中心，上海 200072; 2. 上海大学土木工程系，上海 200072; 3. 上海大学机电工程与自动化学院，上海 200072； 4. 上海隧道工程股份有限公司，上海 200030）

收稿日期:2016-11-07 修回日期:2017-01-08 出版日期:2017-04-20 发布日期:2017-04-28
作者简介:田文攀（1993—），男，河南洛阳人，上海大学建筑与土木工程专业在读硕士，主要研究方向为盾构BIM技术开发应用。Email: 1668270630@qq.com。

Analysis of Storage and Positioning of Precast Segments Based on BIM

TIAN Wenpan^{1, 2}, GAO Xinwen^{1, 3}, WU Huiming⁴

(1. SHUSUCG Research Center for Building Industrialization, Shanghai University, Shanghai 200072, China; 2. Department of Civil Engineering, Shanghai University, Shanghai 200072, China; 3. School of Mechanical Engineering and Automation, Shanghai University, Shanghai 200072, China; 4. Shanghai Tunnel Engineering Co., Ltd., Shanghai 200030, China)

Received:2016-11-07 Revised:2017-01-08 Online:2017-04-20 Published:2017-04-28

摘要/Abstract

摘要：

针对上海地区预制管片堆场堆放层数不确定、堆场布局混乱、管片定位查找困难等问题,将有限元法（FEM）和建筑信息模型（BIM）技术相结合，通过对管片堆放层数仿真分析与管片定位研究，以期找到解决这些问题的方法。为此，先采用Abaqus有限元软件对预制管片堆场进行数值模拟以确定预制管片堆场每个堆位的管片堆放层数，再通过Revit、Navisworks等BIM软件对预制管片堆场进行虚拟布局。在此基础上提出一种基于BIM的混堆模式预制管片堆场定位新方法，该方法以BIM模型为核心，通过与二维码物联网技术和龙门吊智能化控制系统相结合来建立数据的转换与融合，从而实现在BIM终端三维可视化界面下对堆场中的预制管片进行精确定位查找与龙门吊最优路线运输作业。

关键词: 预制管片, 有限元法（FEM）, BIM技术, 混堆模式

Abstract:

The precast segment storage yards in Shanghai have many disadvantages, such as uncertain stacking layers of segment, disordered layout and difficult segment positioning. As a result, finite element method (FEM) and building information model (BIM) technology are adopted. Analysis and study are made on simulation of segment stacking layer number and positioning of segment. The precast segment storage yard is numerically simulated by finite element software Abaqus so as to determine the number of segment stacking layers of every stack. And then the precast segment storage yard is simulated by BIM softwares Revit and Navisworks. Finally, a new segment positioning method based on BIM mixed stacking mode is presented. The abovementioned method is cored on BIM and uses technology of twodimensional code internet of things and intellectualized control of gantry crane. In return, accurate positioning of precast segment and the optimal route of transportation and operation of gantry crane showed on 3D visualization interface of BIM terminal can be realized.

Key words: precast segment, FEM, BIM technology, mixed stacking mode

中图分类号:

U 45

田文攀, 高新闻, 吴惠明. 基于BIM的预制管片堆场存储与定位研究[J]. 隧道建设, 2017, 37(4): 469-475.

TIAN Wenpan, GAO Xinwen, WU Huiming. Analysis of Storage and Positioning of Precast Segments Based on BIM[J]. Tunnel Construction, 2017, 37(4): 469-475.

基于BIM的预制管片堆场存储与定位研究

Analysis of Storage and Positioning of Precast Segments Based on BIM

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价