• CSCD核心中文核心科技核心
  • RCCSE(A+)公路运输高质量期刊T1
  • Ei CompendexScopusWJCI
  • EBSCOPж(AJ)JST
二维码

隧道建设(中英文) ›› 2010, Vol. 30 ›› Issue (4): 482-485.

• 施工机械 • 上一篇    下一篇

构主要钢结构件加工的质量控制

胡尚军   

  1. 中铁隧道装备制造有限公司
  • 收稿日期:2010-05-06 修回日期:2010-08-12 出版日期:2010-08-27 发布日期:2010-08-30
  • 作者简介:胡尚军(1974—),男,四川武胜人,2000年毕业于湘潭工学院机械设计及其自动化专业,本科,工程师,主要从事盾构生产及技术管理工作。

Quality Control during Manufacturing of Main Steel Components of Shield

HU Shang-Jun   

  1. China Railway Tunneling Equipment Co., Ltd.
  • Received:2010-05-06 Revised:2010-08-12 Online:2010-08-27 Published:2010-08-30

摘要:

由于盾构主要钢结构件的加工质量直接影响到盾构整机生产周期和质量,如何控制好盾构主要钢结构件的加工质量就显得尤为重要。结合中国中铁复合式盾构样机主要钢结构件的加工过程,采用以各部件质量关键控制点对盾构主要钢结构件加工的质量进行过程控制的方法,总结出质量关键控制点的质量控制模式。

关键词: 盾构, 钢结构件, 质量控制

Abstract:

The manufacturing quality of the main steel components of the shield is directly related to the manufacturing schedule and quality of the whole shield machine. Thus, the quality control of those components of shield is very important. The quality control method stressing on the key manufacturing process of each main steel component is adopted and the quality control mode for key quality control steps is summarized on basis of study on the manufacturing procedure of the main steel components of CREC composite sample shield machine.

Key words: shield, steel component, quality control