ISSN 2096-4498 CN 44-1745/U
隧道建设(中英文) ›› 2010, Vol. 30 ›› Issue (4): 486-491.
• 施工机械 • 上一篇 下一篇
叶忠
收稿日期:
修回日期:
出版日期:
发布日期:
作者简介:
XIE Zhong
Received:
Revised:
Online:
Published:
摘要:
以某长江隧道盾构管片拼装机为例,结合PLC程序,针对施工过程中出现的下列故障:管片拼装机只能像一个方向旋转、真空电磁阀不动作、管片拼装机大臂油缸不能提升、大臂不能同时收缩等提出解决与预防措施。通过对故障分析总结,提高了管片拼装机的工作效率,保证了施工进度。
关键词: 盾构, 吸盘式管片拼装机, PLC, 真空泵, 负压, 梯形图, 故障诊断
Abstract:
In order to solve the problems such as rotation of segment erector in only one direction, no reaction of vacuum electromagnetic valves, no withdraw of the boom cylinder of segment erector and no simultaneous withdraw of the telescopic arms of segment erector, solutions and prevention measures are proposed, with the operation of the segment erector of a shield machine for a Yangtze River crossing tunnel as an example. Analysis is made on the malfunctions and experience is summarized. In the end, the working efficiency of the segment erector is improved and the construction schedule is guaranteed.
Key words: shield machine, vacuumtype segment erector, PLC, vacuum pump, vacuum, ladder diagram, malfunction diagnosis
叶忠. 盾构管片拼装机原理及故障诊断与预防[J]. 隧道建设, 2010, 30(4): 486-491.
XIE Zhong. Operation Principle, Malfunction Diagnosis and Malfunction Prevention of Segment Erectors of Shield Machines[J]. Tunnel Construction, 2010, 30(4): 486-491.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.suidaojs.com/CN/
http://www.suidaojs.com/CN/Y2010/V30/I4/486