镐齿滚刀的齿形及布齿参数优化试验研究

doi:10.3973/j.issn.2096-4498.2024.S1.048

隧道建设（中英文） ›› 2024, Vol. 44 ›› Issue (S1): 448-455.DOI: 10.3973/j.issn.2096-4498.2024.S1.048

镐齿滚刀的齿形及布齿参数优化试验研究

康乐¹，殷丽君^{1, *}，马亚楠¹，龚秋明¹，马洪素^{2, 3}

(1. 北京工业大学城市防灾与减灾教育部重点实验室，北京 100124； 2. 核工业北京地质研究院，北京 100029； 3. 国家原子能机构高放废物地质处置创新中心，北京 100029）

出版日期:2024-08-20 发布日期:2024-09-02
作者简介:康乐（1996—），男，山西太原人，北京工业大学土木工程专业在读硕士，研究方向为岩土工程。E-mail： kangl@emails.bjut.edu.cn。*通信作者：殷丽君， E-mail： lijun.yin@bjut.edu.cn。

Experimental Study on Optimization of Pick Tooth Shape and Arrangement Parameters for Pick Tooth Inserted Cutter

KANG Le¹, YIN Lijun^{1, *}, MA Yanan¹, GONG Qiuming¹, MA Hongsu^{2, 3}

(1. Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology, Beijing 100124, China; 2. Beijing Research Institute of Uranium Geology, Beijing 100029, China; 3. CAEA Innovation Center for Geological Disposal of High-Level Radioactive Waste, Beijing 100029, China)

Online:2024-08-20 Published:2024-09-02

摘要/Abstract

摘要： 为研究镶齿滚刀上镐齿的齿形参数以及齿间距、排间距对其破岩效率及齿下岩石损伤区的影响规律，选用不同齿形的镐齿对尺寸为300 mm×300 mm ×300 mm北山花岗岩进行侵入破岩试验，对镐齿侵入试验过程、侵入力、破岩体积、破岩效率、齿下岩石损伤区特征进行分析。试验结果表明： 1）所选试验齿形中直径为18 mm镐齿破岩效率最高； 2）齿间距和排间距为35~40 mm时，镐齿侵入破岩效率最高； 3）应用荧光裂纹显现法分析齿下岩石裂纹分布特征，获得了不同齿形参数下岩石损伤区范围及裂纹扩展模式、裂纹特征分析结果，与通过侵入力、破岩比能分析得出的破岩效率结论一致。

关键词: 镐齿, 侵入破岩试验, 齿形及布齿参数, 破岩效率, 损伤区特征

Abstract: To examine the influence of tooth shape parameters, tooth spacing, and row spacing on the rock breaking efficiency and rock damage zone under the teeth of the toothed roller cutter, different tooth shapes of the toothed cutter are selected to conduct intrusion rock breaking tests on Beishan granite with a size of 300 mm×300 mm×300 mm. The intrusion process, intrusion force, rock breaking volume, rock breaking efficiency, and characteristics of rock damage zone under the teeth are analyzed. The experimental results reveal the following: (1) The rock breaking efficiency of the selected test tooth shape with a diameter of 18 mm is the highest. (2) When the tooth spacing and row spacing ranging from 35 to 40 mm can achieve the highest rock breaking efficiency of the pick tooth intrusion. (3) The fluorescence crack visualization method is employed to analyze the distribution characteristics of rock cracks under teeth. The range of rock damage zone and crack propagation mode under different tooth shape parameters are obtained, and the crack characteristic analysis results are consistent with the results of rock breaking efficiency obtained through intrusion force and rock breaking specific energy analysis.

Key words: pick tooth, intrusion rock breaking test, tooth shape and arrangement parameters, rock breaking efficiency, damage zone characteristics

康乐, 殷丽君, 马亚楠, 龚秋明, 马洪素. 镐齿滚刀的齿形及布齿参数优化试验研究[J]. 隧道建设, 2024, 44(S1): 448-455.

KANG Le, YIN Lijun, MA Yanan, GONG Qiuming, MA Hongsu. Experimental Study on Optimization of Pick Tooth Shape and Arrangement Parameters for Pick Tooth Inserted Cutter[J]. Tunnel Construction, 2024, 44(S1): 448-455.

[1]	郑彦龙, 马中骏, 李建春, 赵晓豹. Fracturing of an Artificial Rock Mass by Open-Ended Microwave and Potential Benefits to Assisted Mechanical Excavation(开放式微波致裂模拟节理岩体试验及辅助破岩评估)[J]. 隧道建设, 2023, 43(8): 1338-1347.
[2]	韩伟锋. 水射流辅助机械滚刀破岩试验研究[J]. 隧道建设, 2022, 42(8): 1414-1419.
[3]	张宁川. TBM、盾构盘形滚刀硬岩掘进的刃口磨损形状分析及优化对策[J]. 隧道建设, 2021, 41(4): 657-665.
[4]	龚秋明，周小雄，殷丽君, 何冠文，苗崇通. 基于线性切割试验碴片分析的滚刀破岩效率研究[J]. 隧道建设, 2017, 37(3): 363-368.

镐齿滚刀的齿形及布齿参数优化试验研究

Experimental Study on Optimization of Pick Tooth Shape and Arrangement Parameters for Pick Tooth Inserted Cutter

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价