基于宏观能量理论与微观磨损机制的滚刀磨损量预测

doi:10.3973/j.issn.1672-741X.2015.12.019

中国科学引文数据库（CSCD）来源期刊
中文核心期刊中文科技核心期刊
Scopus RCCSE中国核心学术期刊
美国EBSCO数据库俄罗斯《文摘杂志》
《日本科学技术振兴机构数据库（中国）》

隧道建设（中英文） ›› 2015, Vol. 35 ›› Issue (12): 1356-1360.DOI: 10.3973/j.issn.1672-741X.2015.12.019

基于宏观能量理论与微观磨损机制的滚刀磨损量预测

杨延栋，陈馈，张兵，郭璐

（盾构及掘进技术国家重点实验室，河南郑州 450001）

收稿日期:2015-08-27 修回日期:2015-09-07 出版日期:2015-12-20 发布日期:2016-01-08
作者简介:杨延栋(1988-)，男，陕西宝鸡人，2014年毕业于西南交通大学，机械设计及理论专业，硕士，助理工程师，从事盾构及掘进技术研究工作。
基金资助:
国家重点基础研究发展计划(973计划)项目(2014CB046906)；中铁隧道集团科技创新计划项目(隧研合2014-01)

Prediction of Disc Cutter Wearing Loss Based onMacro Energy Theory and Micro Wearing Mechanism

YANG Yandong, CHEN Kui, ZHANG Bing, GUO Lu

(State Key Laboratory of Shield Machine and Boring Technology, Zhengzhou 450001, Henan, China)

Received:2015-08-27 Revised:2015-09-07 Online:2015-12-20 Published:2016-01-08

摘要/Abstract

摘要：

为了准确预测全断面岩石掘进机长距离掘进硬岩地层的滚刀更换与使用量，量化滚刀检修、更换的时间与费用，从滚刀磨损宏观能量转换入手，基于能量磨损理论，通过分析摩擦功与磨损体积之间的关系，建立滚刀宏观能量理论的磨损量预测模型；从滚刀磨损的微观磨损机制入手，基于磨粒磨损机制，通过分析微观磨粒犁沟与滚刀宏观磨损量的关系，建立滚刀微观磨损机制的磨损量预测模型。通过某引水隧洞工程的现场磨损数据与掘进参数对2种预测方法的可行性进行验证，结果表明: 2种预测模型对滚刀磨损量的预估具有一定的参考；提高预测结果的准确性需通过实验方法建立关键参数的选取准则。

关键词: 全断面岩石掘进机（TBM）, 盘形滚刀, 磨损量预测, 能量磨损理论, 磨粒磨损机制

Abstract:

The relationship between the frictional work and wearing volume of disc cutters is analyzed on the basis of the macro energy conversion of disc cutter wearing, and the disc cutter wearing prediction model based on the macro energy theory is established. Furthermore, the relationship between the micro wearing particle furrow of the disc cutter and the macro wearing loss is analyzed on the basis of the micro wearing mechanism of disc cutters, and the disc cutter wearing prediction model based on micro wear mechanism is established. The two prediction models are verified through field test data acquired in the construction of a water conveyance tunnel. Conclusions drawn are as follows: 1) These two prediction models can provide reference for the prediction of the disc cutter wearing; 2) It is necessary to establish the selection criteria for the key parameters by means of experiments, so as to improve the prediction accuracy.

Key words: full face rock tunnel boring machine (TBM), disc cutter, wearing loss prediction, energy wear theory, abrasive wear mechanism

中图分类号:

U 455.43

杨延栋，陈馈，张兵，郭璐. 基于宏观能量理论与微观磨损机制的滚刀磨损量预测[J]. 隧道建设, 2015, 35(12): 1356-1360.

YANG Yandong, CHEN Kui, ZHANG Bing, GUO Lu. Prediction of Disc Cutter Wearing Loss Based onMacro Energy Theory and Micro Wearing Mechanism[J]. Tunnel Construction, 2015, 35(12): 1356-1360.

[1]	薛亚东，廉旭，李兴，周杰. 滚刀破岩引致岩石振动特性试验研究[J]. 隧道建设, 2018, 38(S2): 337-344.
[2]	孙振川，杨延栋，陈馈，李凤远，张兵. 引汉济渭岭南TBM工程二长花岗岩地层滚刀磨损研究[J]. 隧道建设, 2017, 37(9): 1167-1172.
[3]	张厚美. TBM盘形滚刀磨损与滚刀滑动距离关系研究[J]. 隧道建设, 2017, 37(3): 369-374.
[4]	王辉平. 盘形滚刀刀圈轧制数值模拟研究[J]. 隧道建设, 2017, 37(11): 1483-1487.
[5]	杨延栋，陈馈，郭璐，李星. 全断面岩石隧道掘进机滚刀磨损影响因素分析[J]. 隧道建设, 2016, 36(11): 1394-1400.
[6]	赵振威，郑康泰，李楠，马常成. 不同几何结构的TBM刀盘静力学性能对比分析[J]. 隧道建设, 2016, 36(1): 102-107.
[7]	陈启伟，李凤远，韩伟锋. 隧道掘进机滚刀岩机作用实验台的研制[J]. 隧道建设, 2013, 33(6): 437-442.
[8]	张合沛，李凤远，王助锋. 基于PLC刀盘刀具破岩模态实验平台控制系统设计[J]. 隧道建设, 2012, 32(3): 421-426.
[9]	袁超, 唐莉梅, 余立新, 周勇. 盾构机盘形滚刀刀圈与地层适应性分析[J]. 隧道建设, 2009, 29(增刊1): 9-11.
[10]	宋天田, 杜衡, 徐静松. 复合地层中盾构盘形滚刀偏磨机理研究[J]. 隧道建设, 2009, 29(增刊1): 12-14.
[11]	古宗华. 盘形滚刀的维修与管理[J]. 隧道建设, 2009, 29(增刊1): 88-92.

基于宏观能量理论与微观磨损机制的滚刀磨损量预测

Prediction of Disc Cutter Wearing Loss Based onMacro Energy Theory and Micro Wearing Mechanism

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价