• 中国科学引文数据库(CSCD)来源期刊
  • 中文核心期刊中文科技核心期刊
  • Scopus RCCSE中国核心学术期刊
  • 美国EBSCO数据库 俄罗斯《文摘杂志》
  • 《日本科学技术振兴机构数据库(中国)》
二维码

隧道建设(中英文) ›› 2018, Vol. 38 ›› Issue (1): 10-21.DOI: 10.3973/j.issn.2096-4498.2018.01.002

• 研究与探索 • 上一篇    下一篇

隧道工程物理模拟试验技术现状与趋势分析

李元海1, 2, 杜建明1, 2,* 刘毅   

  1. (1. 中国矿业大学深部岩土力学与地下工程国家重点试验室, 江苏徐州 221116; 2. 中国矿业大学力学与土木工程学院, 江苏徐州 221116; 3. 中交第二航务工程局有限公司技术中心, 湖北武汉 430040)
  • 收稿日期:2017-07-25 修回日期:2017-11-20 出版日期:2018-01-20 发布日期:2018-02-01
  • 作者简介:李元海(1969—),男,安徽霍邱人,2004年毕业于同济大学,结构工程专业,博士,教授,主要从事隧道及地下工程的研究工作。Email: Lyh@cumt.edu.cn。 *通信作者: 杜建明, Email: 1563907750@qq.com。
  • 基金资助:

    国家重点基础研究发展计划(973计划)项目(2014CB46905); 高等学校学科创新引智计划(B14021)

Stateofart and Development Trend of Physical Simulation Experiment Technology for Tunnel Engineering

LI Yuanhai1, 2, DU Jianming1, 2, *, LIU Yi3   

  1. (1. State Key Laboratory for Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, Jiangsu, China; 2. School of Mechanics and Civil Engineering, China University of Mining and Technology, Xuzhou 221116, Jiangsu, China; 3. National Enterprise Technology Center, CCCC Second Harbor Engineering Co., Ltd., Wuhan 430040, Hubei, China)
  • Received:2017-07-25 Revised:2017-11-20 Online:2018-01-20 Published:2018-02-01

摘要:

为研究解决隧道工程中物理模拟试验系统应用及建设中的技术难题,通过归纳与分类,对当前隧道工程物理模拟试验系统中的关键技术进行对比分析,并系统阐述目前存在的问题及未来发展趋势。最后,提出以模型体积大小为依据的试验系统分类方法。通过分析总结得出: 1)中小型试验系统由于研制费用较低、模型制作速度快、加载操控较精确、变形测量较精细以及利用率较高和经济效益突出,可作为隧道物理模拟试验系统建设的一个重要比选方案; 2)结合数字照相量测与3D打印的透明岩土试验技术有望成为未来隧道物理模拟试验技术发展的一个新方向。

关键词: 隧道工程, 物理模拟试验, 数字照相量测, 应力量测, 加载方法

Abstract:

The key technologies of physical simulation experiment system for tunnel engineering are comparatively analyzed by summary and classification; and the stateofart and development trend of the abovementioned system are presented systematically. And then a new classification method for experiment system is proposed based on model size. The analytical results show that: 1) The small and mediumsized experiment system is advantaged in low cost, rapid model establishment, accurate loading control, fine deformation measurement and high efficiency and good economic benefit, which can be a main alternative scheme for construction of physical simulation experiment system for tunnel. 2) The physical experiment technologies of digital photogrammetry and 3D printing would be a new development direction in the future.

Key words: tunnel engineering, physical simulation experiment, digital photogrammetry, stress measurement, loading method

中图分类号: