纯压弯受力下大断面盾构隧道管片接头抗弯足尺试验研究

doi:10.3973/j.issn.2096-4498.2020.07.008

中国科学引文数据库（CSCD）来源期刊
中文核心期刊中文科技核心期刊
Scopus RCCSE中国核心学术期刊
美国EBSCO数据库俄罗斯《文摘杂志》
《日本科学技术振兴机构数据库（中国）》

隧道建设（中英文） ›› 2020, Vol. 40 ›› Issue (7): 997-1003.DOI: 10.3973/j.issn.2096-4498.2020.07.008

纯压弯受力下大断面盾构隧道管片接头抗弯足尺试验研究

张力^{1, 2}，苏芮²，何川^{1, 2}，封坤^1,
2,*，方若全^{1, 2}，徐培凯^{1, 2}

(1. 西南交通大学交通隧道工程教育部重点实验室，四川成都 610031；2. 西南交通大学土木工程学院，四川成都 610031)

出版日期:2020-07-20 发布日期:2020-07-29
作者简介:张力(1994—),男,湖北仙桃人，西南交通大学土木工程专业在读博士，研究方向为隧道与地下工程。Email: lizhang1896@163. com。*通信作者：封坤， Email： windfeng813@163.com。
基金资助:
国家自然科学基金(51878569)；国家电网重点研究项目(SHJJGC1700023)；国家重点研发计划课题（2016YFC0802202）

Fullscale Experimental Study on Bending Performance of Segmental Joints of Large Crosssection Shield Tunnel under Pure Compressive Bending Condition

ZHANG Li^{1, 2}, SU Rui², HE Chuan^{1, 2}, FENG Kun^{1, 2,*}, FANG Ruoquan^{1, 2}, XU Peikai^{1, 2}

(1. Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University, Chengdu 610031, Sichuan, China; 2. School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, Sichuan, China)

Online:2020-07-20 Published:2020-07-29

摘要/Abstract

摘要： 针对管片接头抗弯试验中接头是否处于纯压弯受力状态影响试验结果准确性问题，设计一套可使接头具有较大转动角度、保证其处于纯压弯受力状态的抗弯加载装置，并开展一系列不同轴力和弯矩下接头抗弯性能试验，试验中采用差动式位移计和应变传感器等对接头变形和螺栓应变进行测量。基于试验结果得出： 1）接头处于纯压弯受力状态时，正负弯矩下管片接头竖向位移、张开量、闭合量、转角、螺栓应力随弯矩变化的曲线较为平顺； 2）正弯矩下接头张开高度随弯矩变化可分为2个变化阶段，而负弯矩下受接缝面复杂变形接触关系影响，在上述2阶段变化规律之间出现了明显的“平台段”； 3）接头采用斜螺栓连接时，[JP2]正弯矩下轴力对接头的抗弯性能影响大于负弯矩下轴力对接头的抗弯性能影响，且正负弯矩下抗弯性能的差异随着轴力的增大而减小。

关键词: 大断面盾构隧道, 管片接头, 纯压弯受力, 抗弯足尺试验, 抗弯性能

Abstract: In the fullscale compressive bending test of segmental joint, whether the joint is in a state of pure compressive bending is one of the most important factors affecting the accuracy of test results. Hence, a loading device for bending test of segmental joint with large rotation angle and in a state of pure compressive bending is designed. A series of bending tests for segmental joint under different axial forces and moments are carried out. The LVDTs and strain gauges are adopted to measure the joint deformation and bolt strain. Based on the test results, the conclusions are drawn as follows: (1) When the joint is in a state of pure compressive bending, the variation curves of vertical displacement, opening, closure, rotation angle, bolt stress with bending moment under positive and negative moments are relatively smooth. (2) The variation of the opening height of joint with bending moment under positive moment can be divided into two stages, while an obvious "platform section" appears between the abovementioned two stages under negative moment due to the influence of complex deformation contact relationship of the joint surface. (3) When the joints are connected by oblique bolt, the axial force has a greater impact on the bending performance of the joint under positive moment than that under negative moment, and the bending performance differences of the segmental joint under positive and negative moments reduce with the increase of axial force.

Key words: large crosssection shield tunnel, segmental joint, pure compressive bending, fullscale bending test, bending performance

中图分类号:

U 45

张力, 苏芮, 何川, 封坤, 方若全, 徐培凯. 纯压弯受力下大断面盾构隧道管片接头抗弯足尺试验研究[J]. 隧道建设, 2020, 40(7): 997-1003.

ZHANG Li, SU Rui, HE Chuan, FENG Kun, FANG Ruoquan, XU Peikai.

Fullscale Experimental Study on Bending Performance of Segmental Joints of Large Crosssection Shield Tunnel under Pure Compressive Bending Condition [J]. Tunnel Construction, 2020, 40(7): 997-1003.

[1]	宋远, 李兆平, 黄明利, 张志恩. 隧道波纹钢板套衬接头抗弯性能有限元分析[J]. 隧道建设, 2020, 40(S1): 216-224.
[2]	张力, 封坤, 何川, 徐培凯, 张景轩, 廖楚天. 盾构隧道管片接头三维精细化数值模拟研究[J]. 隧道建设, 2020, 40(8): 1169-1175.
[3]	罗亦洲，郭小农. 铝合金腔体复合构件抗弯性能试验研究[J]. 隧道建设, 2019, 39(S1): 227-234.
[4]	张子新，谷冠思，黄昕，张家奇，张弛. 盾构隧道管片接头嵌入式密封垫防水性能探究[J]. 隧道建设, 2019, 39(9): 1402-1411.
[5]	张力，封坤，肖明清，苟超，龚彦峰，唐曌. 大断面盾构隧道管片接头抗弯刚度取值研究[J]. 隧道建设, 2019, 39(4): 619-625.
[6]	任天宇，刘树亚, 柳献. 波纹钢板加固盾构隧道衬砌管片抗弯性能试验研究[J]. 隧道建设, 2019, 39(2): 317-323.
[7]	张建刚，孟庆明，李围，何川. 防水密封垫布置方式对管片接头的力学影响分析[J]. 隧道建设, 2019, 39(11): 1790-.
[8]	张建刚，孟庆明，李围，何川. 不同接触并存的管片接头力学分析[J]. 隧道建设, 2019, 39(10): 1594-1600.
[9]	魏于量，丁文其，金跃郎，龚琛杰，姜弘. 新型矩形盾构接头力学性态的有限元分析[J]. 隧道建设, 2017, 37(10): 1309-1316.
[10]	张雪健，庄晓莹，朱合华. 盾构隧道管片接头三维数值模型边界条件研究[J]. 隧道建设, 2014, 34(增刊): 153-158.
[11]	张中杰，叶冠林，汤翔. 中隔墙对上海轨道交通16号线大断面盾构隧道的变形影响分析[J]. 隧道建设, 2014, 34(10): 953-958.
[12]	李春良，王勇，王旭. 不同病害情况下盾构隧道环向刚度的计算方法[J]. 隧道建设, 2013, 33(8): 645-649.

纯压弯受力下大断面盾构隧道管片接头抗弯足尺试验研究

Fullscale Experimental Study on Bending Performance of Segmental Joints of Large Crosssection Shield Tunnel under Pure Compressive Bending Condition

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价