• 中国科学引文数据库(CSCD)来源期刊
  • 中文核心期刊中文科技核心期刊
  • Scopus RCCSE中国核心学术期刊
  • 美国EBSCO数据库 俄罗斯《文摘杂志》
  • 《日本科学技术振兴机构数据库(中国)》
二维码

隧道建设(中英文) ›› 2013, Vol. 33 ›› Issue (2): 165-168.DOI: 10.3973/j.issn.1672-741X.2013.02.014

• 施工机械 • 上一篇    下一篇

基于S7-400H的 EPB盾构盾尾密封系统软件设计

张合沛1,2, 陈馈1,2, 李凤远1,2, 王助锋1,2, 王吉平3   

  1. (1.盾构及掘进技术国家重点实验室, 河南 郑州 450001; 2.中铁隧道集团有限公司, 河南 洛阳 471009; 3.南京理工大学紫金学院, 江苏 南京 210046)
  • 收稿日期:2012-10-09 修回日期:2012-11-20 出版日期:2013-02-20 发布日期:2013-03-05
  • 作者简介:张合沛(1980—),男,河南郑州人,2006年毕业于郑州轻工业学院电气工程及其自动化专业,本科,工程师,主要从事盾构机的系统集成与控制技术研究工作。
  • 基金资助:

    国家重点基础研究发展规划项目计划(973计划)(2012CB724308);国家国际科技合作专项资助(2011DFB71550);中铁隧道集团科技创新项目“自动化集成控制平台研制”(隧技研合2011-38)

Design of Tail Sealing System Software of EPB Shield based on S7-400H

ZHANG Hepei1,2, CHEN Kui1,2, LI Fengyuan1,2, WANG Zhufeng1,2, WANG Jiping3   

  1. (1. State Key Laboratory of Shield Machine and Boring Technology, Zhengzhou 450001, Henan, China; 2. China Railway Tunnel Group Co., Ltd., Luoyang 471009, Henan, China; 3. Zijin College of Nanjing University of Science & Technology, Nanjing 210046, Jiangsu, China)
  • Received:2012-10-09 Revised:2012-11-20 Online:2013-02-20 Published:2013-03-05
  • Supported by:

    This work was supported by the National Key Basic Research Program (973 Program) under Grant No.2012CB724308;The International Science & Technology Cooperation Program of China under Grant No.2011DFB71550

摘要:

利用S7-400H PLC冗余系统平台开发、设计土压平衡(EPB)盾构控制系统软件,能够进一步提高系统的容错能力;对盾尾密封系统的控制及使能条件的关联进行分析、总结,给施工过程中盾构操作及维修人员以指导;对盾尾密封系统的控制流程进行分析,给盾构控制系统软件设计人员以帮助。

关键词: 土压平衡盾构, 盾尾密封, 控制系统, PLC, S7-400H

Abstract:

The software for the control system of EPB shield is developed and designed by means of S7-400H PLC redundancy system platform so as to improve the fault tolerance capability. The control of the tail sealing system and the relationship among enabled conditions are analyzed and summarized. The control procedure of the tail sealing system is analyzed. The paper can provide reference for the operation and maintaining of shield machines, as well as for the design of the control system of shield machines.

Key words: EPB shield, tail sealing, control system, PLC, S7-400H