• 中国科学引文数据库(CSCD)来源期刊
  • 中文核心期刊中文科技核心期刊
  • Scopus RCCSE中国核心学术期刊
  • 美国EBSCO数据库 俄罗斯《文摘杂志》
  • 《日本科学技术振兴机构数据库(中国)》
二维码

隧道建设(中英文) ›› 2015, Vol. 35 ›› Issue (2): 191-196.DOI: 10.3973/j.issn.1672-741X.2015.02.015

• 施工机械 • 上一篇    

成都地铁7号线火神区间盾构选型与关键参数计算分析

吴和北, 管会生, 张瑀   

  1. (西南交通大学机械工程学院, 四川 成都 610031)
  • 收稿日期:2014-10-28 修回日期:2014-12-08 出版日期:2015-02-20 发布日期:2015-02-11
  • 作者简介:吴和北(1990—),男,江西赣州人,西南交通大学在读硕士,研究方向为盾构&TBM设计研究。

Shield Type Selection and Key Parameter Calculation:  Case Study on Shield Machine for South Railway StationShenxianshu  Station Section on Line 7 of Chengdu Metro

WU Hebei, GUAN Huisheng, ZHANG Yu   

  1. (College of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031 Sichuan, China)
  • Received:2014-10-28 Revised:2014-12-08 Online:2015-02-20 Published:2015-02-11

摘要:

盾构选型的合理性和关键参数的准确确定是盾构法工程施工成败的关键。针对成都地铁7号线火车南站至神仙树区间地质和水文特征,结合盾构对不同地层的适应性比较,论证采用土压平衡盾构施工的可行性和必要性。同时就盾构施工可能出现的问题,对盾构各个系统进行选型分析。在盾构推进阻力和刀盘回转阻力计算方法基础上,结合实际的地质参数,计算出该区间内最大的推进阻力为10 659 kN,最大刀盘回转阻力矩为4 072 kN•m;选取合适的储备系数,确定盾构最大推力和刀盘装备扭矩的建议值分别为26 648 kN和6 108 kN•m。最后通过与实际值进行对比,验证了盾构推力和刀盘驱动扭矩理论选型值的准确性。

关键词: 成都地铁, 砂卵石地层, 盾构选型, 推力, 刀盘驱动扭矩

Abstract:

The rationality of shield type selection and the accuracy of the shield parameters are key factors to ensure the success of shieldbored tunnels. In this paper, the geological and hydrological characteristics of South Railway StationShenxianshu Station section on Line 7 of Chengdu Metro are presented, the adaptability of different types of shields to different strata is discussed, and the feasibility and necessity of EPB shield for the project are expounded. Furthermore, the selection of each system of the shield is analyzed. The calculated maximum thrust of the shield machine is 10 659 kN, and the calculated maximum torque of the cutter head is 4 072 kN•m; the proposed maximum thrust of the shield machine is 26 648 kN, and the proposed maximum torque of the cutter head is 6 108 kN•m. Finally, comparison and contrast is made between the calculated values and the measured values, which proves that the theoretical calculation of the thrust of the shield machine and the torque of the cutter head is accurate.

Key words: Chengdu Metro, sandy pebble strata, shield type selection, thrust, cutter head driving torque

中图分类号: