Applications of Mix Ratio of New Lightweight Slurry
for Shield Grouting

YANG Hongbo; CAO Yaodong; CUI Xuejun; LI Yingchuan; XIE Honghui; ZHOU Wei; SHANG Ningning

doi:10.3973/j.issn.2096-4498.2021.04.004

Tunnel Construction >

2021 , Vol. 41 >Issue 4: 554 - 560

DOI: https://doi.org/10.3973/j.issn.2096-4498.2021.04.004

Applications of Mix Ratio of New Lightweight Slurry for Shield Grouting

YANG Hongbo ,
CAO Yaodong ,
CUI Xuejun ,
LI Yingchuan ,
XIE Honghui ,
ZHOU Wei ,
SHANG Ningning

Expand

（1. China Nuclear Power Engineering Co., Ltd., Shenzhen 518124, Guangdong, China; 2. Sinohydro Bureau14 Co., Ltd., Kunming 650200, Yunnan, China; 3. China National Petroleum Corporation Engineering Technology Research Co., Ltd., Tianjin 300450, China）

Online published: 2021-04-30

Fold

Abstract

A new type of lightweight slurry for secondary shield grouting is developed to inhibit the floating of shield segments during tunneling in waterrich hardrock sections. The slurry is suspended above the segment, and it can rapidly solidify. According to comparison and selection, the hydrophobic expanded perlite, high belite sulfur aluminate cement, flocculant UWB Ⅱ and UWB Ⅲ, and polycarboxylic superplasticizer BSH200 can be employed as test raw materials. The effect of various factors on the properties of the slurry, including bulk density, compressive strength, and dispersion resistance, is investigated using the orthogonal test method. Finally, the optimal mix ratio for the slurry is obtained and verified via field test. The results show that the lightweight slurry has an inhibiting effect on the floating of segments.

Key words： shield grouting; lightweight slurry; mix ratio; orthogonal test

Cite this article

YANG Hongbo , CAO Yaodong , CUI Xuejun , LI Yingchuan , XIE Honghui , ZHOU Wei , SHANG Ningning . Applications of Mix Ratio of New Lightweight Slurry for Shield Grouting[J]. Tunnel Construction, 2021 , 41(4) : 554 -560 . DOI: 10.3973/j.issn.2096-4498.2021.04.004

Options

Outlines

〈

〉

模态框（Modal）标题

Abstract

Cite this article