The crystallization blockage often occurs in the
central drainage pipe of the tunnel. Hence, a cleaning technology for the
central drainage pipe of the Guangxi expressway tunnel is tested. First, the
blockage degree of the central drainage pipe of the tunnel is preliminarily
judged by reconnaissance of the outlet and drainage ditch of the tunnel.
Second, the positions of the central drainage pipe and the central inspection
well are determined according to the tunnel design drawings and ground
penetration radar scanning. Third, an inspection hole above the central drain
pipe is drilled to check the internal conditions of the drain pipe using an
industrial endoscope. Fourth, the pavement is cut to clean the working well.
Fifth, the crystalline substance in the central drainage pipe of the tunnel is
cleared using a highpressure cleaning vehicle and
rechecked by a pipeline robot. Finally, the pavement is restored. By using this
suite of cleaning technology, the blocked section of the central drainage pipe
has been completely dredged, the crystalline substances in the pipe have been
cleaned up, the drainage function has been restored, various risks caused by
poor drainage have been reduced, the tunnel traffic safety and structural
safety have been ensured, and the tunnel maintenance cost has been reduced,
providing reference for similar projects.
LI Naiqiang, JIANG Yajun, LIU Shigui, ZENG Chengyu, XIAO Huarong
.
Cleaning Technology of Central Drainage Pipe of Operating Highway Tunnel Based on High Pressure Cleaning Technology
[J]. Tunnel Construction, 2021
, 41(S2)
: 647
-654
.
DOI: 10.3973/j.issn.2096-4498.2021.S2.083