ISSN 2096-4498

   CN 44-1745/U

二维码
  • Home
  • Solicit Contributions
  • Writing Requirements
  • Editorial Board
  • Council Members
  • Publication Ethics
  • Open Access
  • Advertising
  • Contact Us
  • 中文

Tunnel Construction >

2022 , Vol. 42 >Issue 9: 1615 - 1621

DOI: https://doi.org/10.3973/j.issn.2096-4498.2022.09.013

Parametric Calculation for Longitudinal Structure of Shield Tunnel Based on Geological Drilling Data

  • LI Linhao ,
  • CHEN Ke ,
  • HU Yunhua ,
  • LONG Fan
Expand

  • (1. School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan 430074,Hubei, China; 2. Institute of Artificial Intelligence, Huazhong University of Science and Technology, Wuhan 430074, Hubei, China; 3. Wuhan Municipal Engineering Design & Research Institute Co., Ltd., Wuhan 430023, Hubei, China)

Online published: 2022-10-10

Fold

Abstract

To promote digital designing in shield tunnel construction and improve structural calculation efficiency, a parametric calculation method for longitudinal structures of shield tunnels based on geological drilling data is proposed. The method considers geological uncertainties and the threedimensional (3D) spatial linearity of the tunnel longitudinal structure, uses KNearest Neighbor and Ordinary Kriging algorithms to establish a strata database. Then, the reference relation to the structure′s space information of the tunnel axis is created to output load and constraint conditions of the structure. Finally, the equivalent stiffness beam method is employed to conduct longitudinal structure calculation. The method was applied to the QXK6+300~+400 section of the east lake section of the Lianghu tunnel in Wuhan, China. The comparative analytical results between the method proposed and the existing one indicate that the constraint conditions of the method proposed can be automatically calculated through programming without relying on conservative evaluation by humans. In addition, the parametric process meets the subsequent calculation requirements on various sections and can reflect the results of internal force analysis in 3D stress nephogram. Therefore, the proposed method can improve the design efficiency.

Key words： geological drilling; shield tunnel; longitudinal structure; parametric design; equivalent stiffness beam model

Cite this article

LI Linhao , CHEN Ke , HU Yunhua , LONG Fan .

Parametric Calculation for Longitudinal Structure of Shield Tunnel Based on Geological Drilling Data

[J]. Tunnel Construction, 2022 , 42(9) : 1615 -1621 . DOI: 10.3973/j.issn.2096-4498.2022.09.013

Options
Outlines

/

〈 〉

Support by Beijing Magtech Co.ltd support@magtech.com.cn