地铁地下车站装配式结构施工受力特征监测分析

doi:10.3973/j.issn.2096-4498.2025.03.006

隧道建设（中英文） ›› 2025, Vol. 45 ›› Issue (3): 511-520.DOI: 10.3973/j.issn.2096-4498.2025.03.006

地铁地下车站装配式结构施工受力特征监测分析

洪成雨^{1, 2}，林楷哲^{1, 2}，饶伟^{1, 2， *}，陈湘生^{1, 2}，邱桐^{1, 2}，张斌³，戴继³，贾科³

（1. 极端环境岩土和隧道工程智能建养全国重点实验室，广东深圳 518060； 2. 深圳大学土木与交通工程学院，广东深圳 518060； 3. 深圳市地铁集团有限公司，广东深圳 518038）

出版日期:2025-03-20 发布日期:2025-03-20
作者简介:洪成雨（1982—），男，黑龙江哈尔滨人，2011年毕业于香港理工大学，岩土工程专业，博士，副教授，现从事岩土监测、地下装配式结构相关研究工作。E-mail： cyhong@szu.edu.cn。*通信作者：饶伟， E-mail： raowei2021@email.szu.edu.cn。

Monitoring Analysis of Mechanical Characteristics of Prefabricated Structures of an Underground Metro Station During Construction Process

HONG Chengyu^{1, 2}, LIN Kaizhe^1,
2, RAO Wei^{1, 2, *}, CHEN Xiangsheng^{1, 2}, QIU Tong^{1, 2}, ZHANG Bin³, DAI Ji³, JIA Ke³

(1. State Key Laboratory of Intelligent Geotechnics and Tunnelling, Shenzhen 518060, Guangdong, China; 2. College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, Guangdong, China; 3. Shenzhen Metro Group Co., Ltd., Shenzhen 518038, Guangdong, China)

Online:2025-03-20 Published:2025-03-20

摘要/Abstract

摘要： 为解决地铁地下车站装配式结构质量与尺寸大、施工工况多，极易导致结构的变形和应力集中造成的损伤问题，基于高精度、高空间分辨率分布式OFDR技术，对地下装配式结构侧墙内部连续空间的应变进行监测，探索侧墙、顶板、相邻块的拼装，以及车站顶部回填土在多种施工工况下对侧墙内部变形特征的影响；量化分析不同施工工况对侧墙应变场与弯矩分布特征的影响规律，探究多种施工工况对侧墙结构中部与端部弯矩的贡献度，总结地铁地下车站装配式结构高风险点对应的施工工况。研究结果表明： 1）侧墙在拼装与顶部回填土阶段呈现较明显的压弯效应，顶部回填土施工阶段为装配式侧墙结构的最不利工况。2）支撑倒换与侧壁回填工序会增大侧墙结构的弯矩，平均增幅分别为42.8%与19.3%；顶部土体回填期间，B1、B2侧墙最大弯矩分别较前一阶段增长510%、252%。3）侧墙两端与中部弯矩随拼装与回填土工况的进行而不断增大，产生明显弯曲效应。顶部回填土阶段对中部、顶部、底部的弯矩平均贡献度分别为70.4%、69.4%、55.1%；由于上部回填土对侧墙弯矩贡献度最大，回填土施工阶段需要关注上部回填土压力对拼装车站侧墙结构受力的影响。

关键词: 地铁, 地下车站, 装配式结构, 光频域反射技术, 施工工况, 受力特征

Abstract: The massive weight and size of prefabricated structures in underground metro stations, combined with multiple construction conditions, can lead to structural deformation, stress reconcentration, and ultimately, structural damage. To address these challenges, high-precision and high-spatial-resolution distributed optical frequency domain reflectometry technology is utilized to monitor the strain distribution within the sidewalls of underground prefabricated structures. The authors investigate the effects of various construction conditions, including sidewall assembly, roof slab installation, adjacent block assembly, and topsoil backfilling, on the deformation characteristics of the sidewalls. In addition, the effects of varying construction conditions on the strain field and bending moment distribution in the sidewalls are quantitatively analyzed. The contributions of each construction condition to the bending moments in the middle and end positions of the sidewall structures are also investigated. The results reveal the following: (1) Distributed fiber-optic strain monitoring indicates an obvious compression bending effect on the sidewalls during the assembly and topsoil backfilling stages. Among all construction stages, the topsoil backfilling process emerges as the most unfavorable for the stability of sidewall structures. (2) The support replacement and sidewall backfilling processes cause notable increases in the bending moment of the sidewall structure, with average increases of 42.8% and 19.3%, respectively. During the topsoil backfilling stage, bending moments in the B1 and B2 sidewalls increase by 510% and 252%, respectively, compared to the previous stage. (3) Bending moments at the ends and middle of the sidewalls continuously increase with the assembly and backfilling conditions, causing significant bending effects. The average contributions of the topsoil backfilling stage to the bending moments in the middle, top, and bottom of the sidewall are 70.4%, 69.4%, and 55.1%, respectively. The topsoil backfilling contributes the most to the sidewall bending moments. Significant attention should be paid to the influence of the top overburden soil pressure on the structural behavior of the sidewalls of the prefabricated metro station.

Key words: metro, underground station, prefabricated structure, optical frequency domain reflectometry, working conditions, mechanical characteristics

洪成雨, 林楷哲, 饶伟, 陈湘生, 邱桐, 张斌, 戴继, 贾科. 地铁地下车站装配式结构施工受力特征监测分析[J]. 隧道建设, 2025, 45(3): 511-520.

HONG Chengyu, LIN Kaizhe, RAO Wei, CHEN Xiangsheng, QIU Tong, ZHANG Bin, DAI Ji, JIA Ke. Monitoring Analysis of Mechanical Characteristics of Prefabricated Structures of an Underground Metro Station During Construction Process[J]. Tunnel Construction, 2025, 45(3): 511-520.

[1]	薛伟辰, 张保证, 江佳斐, 徐军林, 邢琼. 装配式地下车站混凝土结构力学性能研究与应用进展[J]. 隧道建设, 2025, 45(3): 435-449.
[2]	马伟斌, 王子洪, 王志伟. 地下装配式结构技术现状及在铁路隧道的研究应用[J]. 隧道建设, 2025, 45(3): 450-468.
[3]	洪成雨, 黎宏, 饶伟, 陈湘生, 雷振. 装配式地铁车站大尺寸构件光纤监测与裂纹识别研究[J]. 隧道建设, 2025, 45(3): 499-510.
[4]	张建伟, 张鹏, 王加庆, 崔涛, 陈剑, 邢建军, 解廷伟, 牛宇哲. 明挖车站装配式钢筋笼分布筋搭接接头力学性能试验研究[J]. 隧道建设, 2025, 45(3): 521-531.
[5]	范奇, 林放. 考虑注浆粘结强度的注浆式榫槽接头抗弯性能数值模拟研究[J]. 隧道建设, 2025, 45(3): 532-538.
[6]	林放, 杨秀仁. 装配式地下结构注浆式榫槽接头设计承载判据研究[J]. 隧道建设, 2025, 45(3): 587-595.
[7]	柳成林, 杨明. 装配式站台板结构拆分设计与施工方法研究[J]. 隧道建设, 2025, 45(3): 596-603.
[8]	甘甜. 协同排烟制式下列车越站对地铁站台排烟的影响研究[J]. 隧道建设, 2025, 45(2): 324-331.
[9]	赵文祥, 曲柄宇, 王厚霖, 黄亮亮. BIM技术在盾构管片预埋槽道优化中的应用研究[J]. 隧道建设, 2025, 45(2): 375-381.
[10]	吴森阳, 陈相, 陈棚, 曾瑀韩. 大断面小净距矩形顶管法地铁车站施工风险控制研究——以广州地铁海傍站为例 [J]. 隧道建设, 2025, 45(2): 382-391.
[11]	王卫东, 徐中华, 顾正瑞, 宗露丹. 软土地层地铁隧道受两侧基坑群开挖叠加影响研究[J]. 隧道建设, 2024, 44(S2): 51-60.
[12]	张明聚, 项扬, 李鹏飞, 何海健, 徐晴. 基于组合赋权的地铁渗漏模糊综合评价体系及应用[J]. 隧道建设, 2024, 44(S2): 61-72.
[13]	宋宏倬, 姜谙男, 阮颖颖, 闵庆华. 基于Hoek-Brown弹塑性HMD耦合模型的富水区隧道施工分析[J]. 隧道建设, 2024, 44(S2): 342-351.
[14]	贺腾飞, 王文渊. 冻结暗挖法与明挖法在地下通道工程中的组合应用[J]. 隧道建设, 2024, 44(S1): 418-426.
[15]	张成平, 王李斌, 唐海栋, 彭华, 李宇杰, 牛晓凯. 北京地铁盾构隧道渗漏病害成因及对管片结构的影响研究[J]. 隧道建设, 2024, 44(S1): 456-466.

地铁地下车站装配式结构施工受力特征监测分析

Monitoring Analysis of Mechanical Characteristics of Prefabricated Structures of an Underground Metro Station During Construction Process

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价