ISSN 2096-4498 CN 44-1745/U
隧道建设（中英文） ›› 2014, Vol. 34 ›› Issue (12): 1175-1182.DOI: 10.3973/j.issn.1672-741X.2014.12.010
• 施工技术 • 上一篇 下一篇
尹忠辉
收稿日期:
修回日期:
出版日期:
发布日期:
作者简介:
YIN Zhonghui
Received:
Revised:
Online:
Published:
摘要：
高速铁路隧道工程水沟电缆槽一般分为通信信号槽、电力电缆槽、排水槽，三槽合一，根据高速铁路的设计理念与运营要求，水沟电缆槽必须一次成型，在施工中为了设计出一套系统的电缆槽一次成型配套模板体系，在实践的基础上利用组合模板桁架连接与走行系统结合的方式对电缆槽一次成型施工进行探索和总结。实践证明： 合理地利用桁架模板与走行系统设计出的电缆槽模板，可以有效地完成高速铁路隧道工程水沟电缆槽的一次成型要求。
关键词: 高速铁路, 隧道, 水沟电缆槽, 一次成型, 模板
Abstract:
The drainage ditches and cable channels of tunnels on highspeed railways include communication cable channels, electrical power cable channels and drainage ditches. These three types of channels/ditches are integrated into one body and must be concreted in one operation.In the paper, a set of formworks for the concreting of the drainage ditch and cable channel is designed and the concreting of the drainage ditch and cable channel is described. The construction practice demonstrates that the formwork system with truss structure and moving system can meet the requirements of the concreting of the integrated drainage ditch and cable channel in one operation.
Key words: highspeed railway, tunnel, integrated drainage ditch and cable channel, concreting in one operation, formwork
中图分类号:
U 455
尹忠辉. 高速铁路隧道工程水沟电缆槽一次成型施工技术[J]. 隧道建设, 2014, 34(12): 1175-1182.
YIN Zhonghui. Technology for Concreting of Integrated Drainage Ditch and Cable Channel of Highspeed Railway Tunnels in One Operation[J]. Tunnel Construction, 2014, 34(12): 1175-1182.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.suidaojs.com/CN/10.3973/j.issn.1672-741X.2014.12.010
http://www.suidaojs.com/CN/Y2014/V34/I12/1175
