ISSN 2096-4498 CN 44-1745/U
隧道建设(中英文) ›› 2017, Vol. 37 ›› Issue (3): 342-347.DOI: 10.3973/j.issn.1672-741X.2017.03.013
• 施工技术 • 上一篇 下一篇
黄平华1, 2
收稿日期:
修回日期:
出版日期:
发布日期:
作者简介:
HUANG Pinghua1, 2
Received:
Revised:
Online:
Published:
摘要:
在隧道盾构施工过程中,盾构被困的现象时有发生,对工程施工进度、安全和周围环境等造成不利影响。通过工程实例分析刀盘、盾体和盾尾被困的常见原因,总结相应的脱困措施,得出盾构被困的分类判断依据: 1)刀盘开口处被地层中异常渣土填充束缚的判断依据; 2)边刀(边滚刀或边刮刀)磨损造成掌子面开挖轮廓不足的判断依据; 3)刀盘前方存在硬质障碍物的判断依据。
关键词: 盾构, 被困, 脱困, 刀盘, 盾体, 盾尾
Abstract:
Shield is often jammed during tunneling, which has adverse impact on construction schedule, security and environment. The causes of cutterhead jamming, shield body jamming and shield tail jamming are analyzed; and then corresponding releasing technologies are summarized by cases study. The classification characteristics of shield jamming are summarized as shield cutterhead covered by grout, insufficient excavation contour of tunnel face caused by marginal cutters wear and obstacles in front of cutterhead.
Key words: shield, jamming, jamming releasing, cutterhead, shield body, shield tail
中图分类号:
U 455.3
黄平华. 盾构被困实例分析及脱困措施[J]. 隧道建设, 2017, 37(3): 342-347.
HUANG Pinghua. Case Study of Shield Jamming and Jamming Releasing Technologies[J]. Tunnel Construction, 2017, 37(3): 342-347.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://www.suidaojs.com/CN/10.3973/j.issn.1672-741X.2017.03.013
http://www.suidaojs.com/CN/Y2017/V37/I3/342