Position Judgment Standard for Free Fast Passing Channel of Tunnel Toll Gate: a Case Study of Qingdao Jiaozhou Bay Tunnel

doi:10.3973/j.issn.2096-4498.2019.03.004

Tunnel Construction ›› 2019, Vol. 39 ›› Issue (3): 362-369.DOI: 10.3973/j.issn.2096-4498.2019.03.004

Previous Articles Next Articles

Position Judgment Standard for Free Fast Passing Channel of Tunnel Toll Gate: a Case Study of Qingdao Jiaozhou Bay Tunnel

FENG Xiaoyan¹, CUI Zhibin^{1, *}, ZHANG Aomuhan²

(1. China Railway Tunnel Consultants Co., Ltd., Guangzhou 511455, Guangdong, China; 2. China Academy of Transportation Science, Beijing 100029, China)

Received:2018-02-05 Revised:2018-10-12 Online:2019-03-20 Published:2019-04-03

Abstract

Abstract:

There is not theoretical reference for position judgment standard for free fast passing channel of tunnel toll gate. Hence, a new position judgment method for free fast passing channel of tunnel toll gate is proposed based on queuing theory by taking Jiaozhou Bay Tunnel for example. Meanwhile, the lane length conversion correction model and lane length and area conversion correction model are put forward, and the theoretical value and modification value of the judgment of free fast passing channel of tunnel toll gate are obtained. The research results can provide theoretical support for relevant regulations on free fast passing of tunnel toll gate and provide reference for similar tunnel and highway projects in the future.

Key words: tunnel toll gate, congestion and free fast passing, queuing theory, toll plaza

CLC Number:

U 455.3

FENG Xiaoyan, CUI Zhibin, ZHANG Aomuhan. Position Judgment Standard for Free Fast Passing Channel of Tunnel Toll Gate: a Case Study of Qingdao Jiaozhou Bay Tunnel[J]. Tunnel Construction, 2019, 39(3): 362-369.

[1]	FENG Huanhuan, WANG Shuying, YANG Luwei, YANG Yandong, WANG Wenchao, XIA Ming. Forms and Causes of Failure in Tunnel Boring Machine Cutters under Complex Geological Conditions and Corresponding Countermeasures [J]. Tunnel Construction, 2022, 42(1): 130-136.
[2]	XU Guangyi, XIAO Wei, ZHAO Fei, QI Zhichong, LYU Dan, ZHAO Zihui. Structural Design of a Kind of Caisson Submerged Shaft Boring Machine [J]. Tunnel Construction, 2022, 42(1): 145-153.
[3]	ZHENG Kangtai, JIA Lianhui, NIU Mengjie, LYU Dan, XIAO Wei, WANG Xiaolong. Development and Key System Test of FullFace Shaft Tunneling Machine [J]. Tunnel Construction, 2021, 41(10): 1794-1800.
[4]	DONG Hongjing, AI Rongjun, ZHAO Guozhen, WANG Xiaodong. Design and Application of a Moving System with Wheel-Rail Trolley for Ultra-Large Components Used in ShenzhenZhongshan Link [J]. Tunnel Construction, 2021, 41(9): 1594-1603.
[5]	LIN Chungang, SHANG Wei. Investigation and Application of Integrated Equipment and Technology for Secondary Lining of Giant-Span Underground Cavern [J]. Tunnel Construction, 2021, 41(8): 1412-.
[6]	WANG Chao, LIU Hongzhong, WANG Lehu, TAN Junkun, CAI Ziyong. Penetration Prediction of Disc Cutter of Tunnel Boring Machine Based on Linear Regression Method [J]. Tunnel Construction, 2021, 41(S1): 207-.
[7]	XU Weiqing, ZHANG Hua. Research on Rapid Dismantling and Storage Method of Multiple LargeDiameter Slurry Shields [J]. Tunnel Construction, 2021, 41(S1): 478-.
[8]	LI Jianbin. Current Status, Problems and Prospects of Research, Design, and Manufacturing of Boring Machine in China [J]. Tunnel Construction, 2021, 41(6): 877-896.
[9]	ZHANG Zhonghua, ZHENG Jun, REN Yang, HE Bo. Optimization of Main Drive Seals in Shields [J]. Tunnel Construction, 2021, 41(6): 1065-1070.
[10]	LYU Yonglin, ZHANG Dongjie, TANG Wenxi, YANG Xuezhong, QIN Xiaofeng, REN Yi. Adaptability Analysis of SingleCantilever Tunneling Machine in ShallowCovered Tunnel Excavation in Busy Urban Areas: a Case Study on New Hongyan Tunnel Crossing underneath Underground Shopping Mall [J]. Tunnel Construction, 2021, 41(4): 649-656.
[11]	ZHOU Jianjun, ZHAI Qianzhi, MA Li, WANG Liming, LI Hongbo, ZHAO Hailei. Effect of Angle between Mucking Slot and Adjacent Disc Cutter on Disc Cutter Wear Law [J]. Tunnel Construction, 2021, 41(3): 349-355.
[12]	LI Xianjin, LIN Chungang, LI Jing. New Construction Method for Secondary Lining of Railway Tunnel and Design of Lining Trolley Scheme [J]. Tunnel Construction, 2021, 41(2): 293-299.
[13]	ZHU Jinbo, WANG Cong. Design and Application Technology of Fullsection Large Hydraulic Formwork Trolley for Immersed Tunnel Segment Prefabrication [J]. Tunnel Construction, 2020, 40(12): 1817-1823.
[14]	FANG Junbo, LIU Hongzhen, MA Liuchuang. Tunnel Overbreak Control Technology by Rock drilling Jumbo with Long and Short Blasting Holes [J]. Tunnel Construction, 2020, 40(11): 1642-1648.
[15]	JIA Lianhui, LYU Dan, ZHENG Kangtai, XIAO Wei, FENG Lin. Research and Test on Vertical Discharge of Fullface Shaft Boring Machine [J]. Tunnel Construction, 2020, 40(11): 1657-1663.

Position Judgment Standard for Free Fast Passing Channel of Tunnel Toll Gate: a Case Study of Qingdao Jiaozhou Bay Tunnel

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments