ISSN 2096-4498

   CN 44-1745/U

二维码

Tunnel Construction ›› 2026, Vol. 46 ›› Issue (10): 2147-2162.DOI: 10.3973/j.issn.2096-4498.2026.10.007

Previous Articles     Next Articles

Mechanical Response and Spacing Optimization of Tunnel Complexes Crossing Strike-Slip Fault

GUAN Guoxing1, 2, LONG Teng1, 2, CUI Zhen1, 2, *, SHENG Qian1, 2   

  1. (1. State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, Hubei, China; 2. School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100049, China)
  • Online:2026-10-20 Published:2026-10-20

Abstract: To ensure the safe construction of tunnel complexes crossing active faults, physical model tests and numerical simulations are used to investigate the mechanical response of the surrounding rock and determine the minimum clear spacing of multiple tunnels crossing an active strike-slip fault. First, the need to investigate the spacing of fault-crossing tunnels is demonstrated based on the strain distribution around the tunnels, fracture patterns in the intertunnel rock mass, and stress distribution characteristics obtained from the model tests. Subsequently, numerical simulations are conducted to examine how various factors affect the mechanical response of the surrounding rock of multiple tunnels crossing a strike-slip fault. Finally, based on multiple numerical simulations, the minimum clear spacing is determined using the distribution of plastic zones as a qualitative indicator and tunnel-wall displacement and the yield approach index as quantitative indicators. The effects of various factors on the minimum clear spacing are also analyzed. The results indicate that (1) fault dislocation markedly intensifies interactions between adjacent tunnels. Compared with the single-tunnel case, twin tunnels exhibit more complex surrounding-rock fracture patterns. The peak tensile strains around Tunnels A and B increase by 35.12% and 32.75%, respectively, while the corresponding peak compressive strains increase by 87.50% and 37.00%, respectively; (2) damage to the surrounding rock of the multiple-tunnel system accumulates and expands with increasing fault displacement; (3) the middle rock pillar is the critical load-bearing component governing the stability of the tunnel complex; and (4) larger intertunnel spacing should be adopted in areas with poor surrounding-rock mechanical properties within the fault zone, greater tunnel burial depths, or relatively gentle fault dips, thereby improving the structural safety of the tunnels.

Key words: tunnel complex, strike-slip fault, tunnel spacing, model test, numerical simulation, fault dip angle