Design of and Analysis on Hydraulic Systems of Ground  Conditioning Test Platform

doi:10.3973/j.issn.1672-741X.2012.02.005

Tunnel Construction ›› 2012, Vol. 32 ›› Issue (2): 156-159.DOI: 10.3973/j.issn.1672-741X.2012.02.005

• wenzhang • Previous Articles Next Articles

Design of and Analysis on Hydraulic Systems of Ground Conditioning Test Platform

FENG Huanhuan^1,2, WANG Zhufeng¹, ZHANG Hepei^1

(1. State Key Laboratory of Shield Machine and Boring Technology, Zhengzhou 450003, China;  2. College of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China)

Received:2012-02-10 Revised:2012-03-13 Online:2012-04-20 Published:2012-05-03

Abstract

Abstract: Ground conditioning test platform, which is a basic facility needed to develop ground conditioning agents used in tunneling by EPB shield machines, must have perfect control system and perfect test analysis capability. In the paper, the functional requirements of the ground conditioning test platform are presented, the application of the synchronic propulsion technology, the screw conveying technology and the foam generating technology in the hydraulic systems of the propulsion system, the screw conveying system and the foam generating system are analyzed, the major parameters of the hydraulic systems are calculated, the working principle of each hydraulic system is described in detail and the control strategy of the hydraulic systems is analyzed. The practice shows that the hydraulic systems designed can meet the control requirements of the test platform. 

Key words: shield machine, ground conditioning, test platform, hydraulic system, synchronic propulsion system, screw conveying system, foam generating system

FENG Huan-Huan, WANG Chu-Feng, ZHANG Ge-Pei. Design of and Analysis on Hydraulic Systems of Ground Conditioning Test Platform[J]. Tunnel Construction, 2012, 32(2): 156-159.

/ Recommend

[1]	WANG Shuangwang, YANG Bin, ZHONG Qingfeng, CHEN Liangwu. Intelligent Fault Diagnosis of Low-Speed, Heavy-Load, Ultra-Large Rolling Bearings Using a Channel Attention Mechanism and a One-Dimensional Convolutional Neural Network [J]. Tunnel Construction, 2026, 46(5): 985-993.
[2]	ZHU Yeting, ZHAO Jian, BI Xiangli, ZHU Yanfei, YU Ning, WANG Xiuzhi, HUANG Dezhong, QIN Yuan. Engineering Verification of Parallel Control Technology for Automatic Shield Tunneling and Segment Assembly [J]. Tunnel Construction, 2025, 45(8): 1602-1614.
[3]	ZHU Yeting, BI Xiangli, ZHU Yanfei, YU Ning, WU Di, QIN Yuan, WANG Zhihua, JIANG Haibo. Retrofit and Engineering Practice of Automatic Tunneling Attitude Control for Existing Metro Shield Machines [J]. Tunnel Construction, 2025, 45(7): 1378-1386.
[4]	ZHANG Hongda, MENG Xianjun, HAN Weifeng, ZHANG Chanjuan, JIANG Yongcheng, ZOU Qiang. Fault Diagnosis Strategy for Magnetostrictive Sensor Test Platform Based on Steady State Recognition [J]. Tunnel Construction, 2025, 45(4): 730-739.
[5]	CHEN Gang, ZHU Yeting, WANG Zhihua, WANG Xiuzhi, QIN Yuan, ZHANG Zixin. Experimental Study on Thrust Vector Self-Adaptive Control Technology for Shield Tunneling in Soft Soil Strata [J]. Tunnel Construction, 2024, 44(11): 2159-2170.
[6]	LIU Xingen, WANG Bozhi, LIU Xiaodi. Track Deviation Correction Method of Shield Based on Space S-Curves [J]. Tunnel Construction, 2023, 43(S1): 457-463.
[7]	LI Gongyi. Fault Analysis and Countermeasures for Screw Conveyor of Earth Pressure Balance Shield Boring in LongDistance Hard Rock Section [J]. Tunnel Construction, 2022, 42(S2): 502-507.
[8]	LIU Jiajun, YANG Guang, WANG Junjie, HAN Weifeng, CAI Jun, ZHAO Xiangbo. Development and Application of Intelligent Grease Monitoring Device for Shield Based on Phase Laser Sensor [J]. Tunnel Construction, 2022, 42(S2): 525-532.
[9]	CHEN Qiankun. EnlargingDiameter Modification of Composite Cutterhead of Shield Based on ANSYS [J]. Tunnel Construction, 2022, 42(S2): 533-540.
[10]	LIU Hua. Experimental Research on Key Parameters of Main Drive HighPressure Sealing System of Tunnel Boring Machines [J]. Tunnel Construction, 2022, 42(9): 1622-1627.
[11]	ZHU Yeting. Model Test Verification of Synchronous Technology Combining Shield Tunneling with Segment Assembling Based on Principle of Uniform Loading on a Single Segment [J]. Tunnel Construction, 2022, 42(5): 854-862.
[12]	LI Jianbin. Current Status, Problems and Prospects of Research, Design, and Manufacturing of Boring Machine in China [J]. Tunnel Construction, 2021, 41(6): 877-896.
[13]	LEI Hao, WU Honggang, MENG Qingyi, HE Changjiang, LI Dezhu. Study on Seismic Dynamic Response of Oblique Overlapped Tunnels [J]. Tunnel Construction, 2021, 41(1): 88-99.
[14]	HUANG Zhonghui, CHEN Fan, MENG Qingjun, LIU Chuankun, CHENG Fan, WANG Shimin, YAO Chaofan. Analysis of Risks and Targeted Design of Dualmode Shield in Composited Strata [J]. Tunnel Construction, 2020, 40(S2): 297-305.
[15]	CHEN Yanan, CHEN Liangwu, ZHAO Lei, MA Lin. Detection and Cause Analysis of Main Drive Seal Failure of Shield Machine [J]. Tunnel Construction, 2020, 40(S1): 419-422.

Design of and Analysis on Hydraulic Systems of Ground Conditioning Test Platform

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments