ISSN 2096-4498
CN 44-1745/U
Tunnel Construction ›› 2013, Vol. 33 ›› Issue (8): 700-703.DOI: 10.3973/j.issn.1672-741X.2013.08.014
Previous Articles Next Articles
LI Weixian, LIU Yonglei
Received:
Revised:
Online:
Published:
Abstract:
The heating power and charging oil quantity of the closed hydraulic system of the main drive of a shield are analyzed and calculated on basis of the working principle and oil charging mechanism of the closed hydraulic system. The calculation formula for the replacing oil quantity and the charging oil quantity of the closed hydraulic system are obtained and the oil replacing coefficient and oil charging coefficient are worked out. During the calculation, the oil running out of the closed hydraulic system is regarded as an integral part, so as to avoid discussion and calculation of the quantity of the leaked oil and the quantity of the replaced oil. The theory proves that the quantity of oil charged is sufficient. The paper can provide reference for the selection of oil charging pumps in the future.
Key words: shield, closed hydraulic system, heating power, oil replacing, oil charging
LI Weixian, LIU Yonglei. Analysis on Oil Charging Quantity for Closed Hydraulic System of Shield[J]. Tunnel Construction, 2013, 33(8): 700-703.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.suidaojs.com/EN/10.3973/j.issn.1672-741X.2013.08.014
http://www.suidaojs.com/EN/Y2013/V33/I8/700
Key Technologies of Cutterhead Configuration and Cutter Replacement for Large diameter Shield under High Water Pressure
Fullscale Experimental Study on Bending Performance of Segmental Joints of Large Crosssection Shield Tunnel under Pure Compressive Bending Condition
Launching and Receiving Technology of Large Crosssection Horseshoeshaped Shield Used in Baicheng Tunnel