ISSN 2096-4498
CN 44-1745/U
Tunnel Construction ›› 2019, Vol. 39 ›› Issue (7): 1158-1164.DOI: 10.3973/j.issn.2096-4498.2019.07.013
Previous Articles Next Articles
YANG Guang
Received:
Revised:
Online:
Published:
Abstract:
The TBM construction organization mode of one tunnel for two TBMs, i.e. the assembly and excavation of two TBMs carried out in a same tunnel, is adopted in a section of the second phase of water diversion project in North Xinjiang. In order to realize simultaneous assembly of 2 TBMs and rapid excavation, the combination method of engineering analogy and numerical calculation is adopted, the defects of original design form of assembly tunnel are analyzed, an optimization scheme is proposed, and the structural stress at the intersection of the main branch, where the structure has been changed lot, is calculated to ensure structural stability. The simultaneous assembly of 2 TBMs in optimized TBM assembly tunnel has been realized, rapid excavation has been achieved, and the construction schedule has been shortened.
Key words: water diversion tunnel, TBM, one tunnel for two TBMs, TBM assembly tunnel, structure form
CLC Number:
U 45
YANG Guang. Optimization of Structure Form of an Assembly Tunnel for Two TBMs[J]. Tunnel Construction, 2019, 39(7): 1158-1164.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.suidaojs.com/EN/10.3973/j.issn.2096-4498.2019.07.013
http://www.suidaojs.com/EN/Y2019/V39/I7/1158
Design and Analysis of a New TBM Propulsion System with Small Turning Radius
Dynamic Model and Vibration Analysis of TBM Edge Disccutter Based on MATLAB/Simulink