Development of Finite Element Parametric Modeling System for TBM Cutterhead

doi:10.3973/j.issn.1672-741X.2015.04.018

Tunnel Construction ›› 2015, Vol. 35 ›› Issue (4): 382-386.DOI: 10.3973/j.issn.1672-741X.2015.04.018

Development of Finite Element Parametric Modeling System for TBM Cutterhead

PAN Lingling¹, JIAO Yongshu¹, CAI Zongxi²

(1. School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China; 2. Department of Mechanics, Tianjin University, Tianjin 300072, China)

Received:2014-12-22 Revised:2015-02-10 Online:2015-04-20 Published:2015-04-22

Abstract

Abstract:

In order to meet the requirement of rapid establishment of TBM cutterhead finite element model, APDL and VC++ visible programming technology are used, some friendly interactive interfaces are developed, and a series of visualized finite element parametric modeling system is established, as a result, parameters can be transferred between VC++ and ANSYS. Furthermore, a finite element model is established for a 4 mdiameter TBM cutterhead, so as to verify the practicability and reliability of the system. The digitalized modeling, analyzing and design of TBM cutterhead can be realized by using the mentioned system.

Key words: TBM cutterhead, parametric modeling, APDL, finite element, VC++

CLC Number:

U 455.3+1

PAN Lingling, JIAO Yongshu, CAI Zongxi. Development of Finite Element Parametric Modeling System for TBM Cutterhead[J]. Tunnel Construction, 2015, 35(4): 382-386.

/ Recommend

[1]	YANG Hao, WANG Leming, LIU Zhuangzhuang, WANG Pengle, LI Jiaqi. Mechanical Mechanism of Composite Double-Layer Lining Shield TunnelStructures Under Riverbed Scouring: A Case Study of Chongtai Yangtze River Tunnel [J]. Tunnel Construction, 2026, 46(5): 1060-1072.
[2]	XIE Xin, WANG Jian, WANG Hengdong, KANG Mingrui, GAO Chengpeng. Longitudinal Mechanical Properties of Two-Story Double-Cabin Composite Prefabricated Assembled Utility Tunnel Under Local Overload [J]. Tunnel Construction, 2026, 46(4): 733-740.
[3]	LEI Mingfeng, LI Changwan, YANG Pengliang, JIA Chaojun, LI Chuitian. Impact Zoning of Construction Disturbance on Nearby Existing Damaged BuildingsInduced by Foundation Pit of a Metro Station Based on Extended Finite Element Method and Response Surface Method [J]. Tunnel Construction, 2026, 46(1): 69-79.
[4]	HE Tao, LIU Boyuan, LU Zhipeng, CHEN Kai, TANG Shanbiao. Efficient Cross-Scale Fine Analysis of Influencing Factors of Stress in Single-Layer Pressurized Tunnels [J]. Tunnel Construction, 2025, 45(S2): 174-183.
[5]	LI Zeyao, CHEN Shengyang, JIANG Jiafei, LI Ya, XUE Weichen. Structural Performance of Modular Concrete Utility Tunnels [J]. Tunnel Construction, 2025, 45(9): 1711-1718.
[6]	XU Chen, XIAO Mingqing, XUE Guangqiao, HE Yingdao, XU Wei, WANG Chunhui. Propagation Mechanisms and Environmental Responses of Train-Induced Vibrations in High-Speed Railway Shield Tunnels: A 2.5-Dimensional Finite Element Method-Method of Fundamental Solutions Approach [J]. Tunnel Construction, 2025, 45(7): 1260-1271.
[7]	YU Jiayin, CHEN Shengyang, LIU Wenqing, YAN Hongying, XUE Weichen. Mechanical Properties of Hybrid Precast Utility Tunnel Double-Cabin Structures Composed of Composite Slabs Using Reinforcement Connection [J]. Tunnel Construction, 2025, 45(7): 1298-1306.
[8]	LI Zihao, CHEN Shengyang, YAN Jiajia, XUE Weichen. Mechanical Properties of Overall Structure of Bolted Connected Slab-Assembly Precast Utility Tunnels [J]. Tunnel Construction, 2025, 45(6): 1154-1162.
[9]	XU Junlin, HU Xinyu, JIANG Jiafei, ZHOU Yan, HU Zhengbo, XUE Weichen. Experiment and Finite Element Analysis on Shear Performance of Steel Plate-to-Sleeve Connection with Overflowed Grout [J]. Tunnel Construction, 2025, 45(3): 469-476.
[10]	WANG Weidong, XU Zhonghua, GU Zhengrui, ZONG Ludan. Superposed Effects on Deformation of Metro Tunnels in Soft Soils Caused by Excavation of Foundation Pits on Both Sides [J]. Tunnel Construction, 2024, 44(S2): 51-60.
[11]	LI Dawei. Failure Analysis and Solutions for Rotating Body of Shield Tunnel Segment Assembly Machine [J]. Tunnel Construction, 2024, 44(S2): 462-469.
[12]	ZHENG Jiayan, LAN Pengbo, LIU Haijing, LU Zhan, YANG Lijuan, CHEN Dingjia. Analytical Solution of Bending Moment and Section Parameters of Square Arched Corrugated Steel Utility Tunnel [J]. Tunnel Construction, 2024, 44(S1): 167-178.
[13]	LUO Gang, YANG Yunsheng, YAN Li, ZHANG Yuhang, AHMED MD Elias, LIU Fengling. Influence of Shape of Submerged Floating Tunnel Body on Structural Response to Underwater Explosion [J]. Tunnel Construction, 2024, 44(6): 1233-1240.
[14]	GUO Yawei, JIN Wenliang, SONG Shenyou, FU Baiyong. Impact of Concrete Void Repair on Mechanical Performance of Angle Steel Connectors [J]. Tunnel Construction, 2024, 44(3): 526-534.
[15]	YANG Yun, TAO Dongqing, GUO Jianhao, CHEN Lina, LAN Hao. Calculation Method for Mud Cake Development Degree at Cutter Beam Area of Cutterhead Under Atmospheric Pressure  Using Kriging Interpolation and Its Application [J]. Tunnel Construction, 2024, 44(3): 543-553.

Development of Finite Element Parametric Modeling System for TBM Cutterhead

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments