Influence of Measuring Tower Offset During
Installation of LongandLarge
Immersed Tunnel Element

XIA Qiaowang; JIN Wenliang; HE Chunning

doi:10.3973/j.issn.2096-4498.2022.S2.027

Tunnel Construction >

2022 , Vol. 42 >Issue S2: 220 - 224

DOI: https://doi.org/10.3973/j.issn.2096-4498.2022.S2.027

Influence of Measuring Tower Offset During Installation of LongandLarge Immersed Tunnel Element

XIA Qiaowang ,
JIN Wenliang ,
HE Chunning

Expand

(1. Shanghai Tunnel Engineering & Rail Transit Design and Research Institute, Shanghai 200235, China; 2. Shenzhong Link Management Center, Zhongshan 528400, Guangdong, China)

Online published: 2023-03-24

Fold

Abstract

The lateral offset of the measuring tower top increases with increasing buried depth of immersed tunnel segment during segment sinking of ShenzhenZhongshan link. To investigate the measuring data abnormality of measuring tower top and further provide reference for decisionmaking of response to segment attitude, the threedimensional finite element modeling software is used to comprehensively analyze the deformation of segments and measuring tower during segment sinking under the actions of wind, sea wave, and waterflow. The results are compared with the monitoring data of immersed tunnel segment during sinking. The analytical results reveal that the flexure deformation of segment and the influence of sea tide are the main reasons for the offset of measuring tower top. Finally, corresponding solutions and suggestions are proposed to control the segment installation accuracy.

Key words： immersed tunnel; element installation; flexure deformation; measuring tower

Cite this article

XIA Qiaowang , JIN Wenliang , HE Chunning . Influence of Measuring Tower Offset During Installation of LongandLarge Immersed Tunnel Element[J]. Tunnel Construction, 2022 , 42(S2) : 220 -224 . DOI: 10.3973/j.issn.2096-4498.2022.S2.027

Options

Outlines

〈

〉

模态框（Modal）标题

Abstract

Cite this article