• 中国科学引文数据库(CSCD)来源期刊
  • 中文核心期刊中文科技核心期刊
  • Scopus RCCSE中国核心学术期刊
  • 美国EBSCO数据库 俄罗斯《文摘杂志》
  • 《日本科学技术振兴机构数据库(中国)》
二维码

隧道建设(中英文) ›› 2014, Vol. 34 ›› Issue (1): 60-66.DOI: 10.3973/j.issn.1672-741X.2014.01.010

• 施工技术 • 上一篇    下一篇

港珠澳大桥岛隧工程设计施工关键技术

尹海卿   

  1. (中交联合体港珠澳大桥岛隧工程项目总经理部, 广东 珠海 519080)
  • 收稿日期:2013-12-20 出版日期:2014-01-20 发布日期:2014-01-21
  • 作者简介:尹海卿(1962—),男,江苏吴江人,1983年毕业于大连工学院海洋石油建筑工程专业,本科,高级工程师,主要从事水运工程、桥梁隧道工程施工技术研究及管理工作。现任中交联合体港珠澳大桥岛隧工程项目总部副总经理、常务副总工程师,是中国水运协会专家库成员,上海港口工程专家库成员。曾获国家科技进步二等奖一项,上海市“科技进步”一等奖一项、二等奖一项。

Key Technologies Applied in Design and Construction of Artificial Islands and Immersed Tunnel of Hong KongZhuhaiMacau Bridge (HZMB) Project

YIN Haiqing   

  1. (Project Management Dept. for Island & Tunnel Project of Hong KongZhuhaiMacao Bridge Joint  Venture of China Communications Construction Co., Ltd., Zhuhai 519080, Guangdong, China)
  • Received:2013-12-20 Online:2014-01-20 Published:2014-01-21

摘要:

港珠澳大桥岛隧工程是连接香港、珠海及澳门的大型跨海通道。主要介绍了: 1)人工岛的设计方案、钢圆筒制作运输及振沉技术; 2)沉管隧道设计施工关键技术,如沉管隧道基础、深埋大回淤节段式沉管、沉管管节预制、沉管浮运及安装、曲线段管节等; 3)各施工阶段的主要专用设备,如8锤联动大型圆筒同步振沉系统、定深平挖抓斗船(精挖)、耙头定压专用清淤船和全断面预制液压模板系统等。解决了工程中遇到的众多问题,克服了重重困难,取得了一定进展。

关键词: 港珠澳大桥, 人工岛, 沉管隧道, 钢圆筒, 振沉技术, 基槽粗挖、精挖, 基槽清淤, 基础抛石夯平, 碎石基床铺设, 节段式沉管, 沉管管节预制, 大型液压模板系统, 沉管浮运及安装

Abstract:

Hong KongZhuhaiMacao Bridge is a large scale seacrossing project connecting Hong Kong, Zhuhai and Macao. In the paper, the following contents are presented: 1) The design of the artificial island and the fabrication, transportation and sinking of steel cylinders; 2) Key technologies applied in the design and construction of the immersed tunnel, including technologies related to the foundation of the immersed tunnel, tube element consisting of several segments under large overburden and serious silting conditions, prefabrication of tube elements, towing and installation of tube elements, and tube elements on curved alignment; 3) Major construction equipment used, including steel cylinder sinking equipment, dredging barges, silt cleaning barges and hydraulic full crosssection formwork equipment. Due to the key technologies described, the problems encountered have been solved and great progress has been achieved.

Key words: Hong KongZhuhaiMacau Bridge (HZMB), artificial island, immersed tunnel, steel cylinder, vibration sinking technology, trench dredging, trench silt cleaning, foundation riprapping and tamping, crushed stone bedding layer, tube element consisting of several segments, tube element prefabrication, large scale formwork equipment, tube towing and installation