• 中国科学引文数据库(CSCD)来源期刊
  • 中文核心期刊中文科技核心期刊
  • Scopus RCCSE中国核心学术期刊
  • 美国EBSCO数据库 俄罗斯《文摘杂志》
  • 《日本科学技术振兴机构数据库(中国)》
二维码

隧道建设(中英文) ›› 2018, Vol. 38 ›› Issue (2): 217-223.DOI: 10.3973/j.issn.2096-4498.2018.02.009

• 研究与探索 • 上一篇    下一篇

8字结形格栅钢架腹筋力学作用试验研究

王刚1, 马兆飞2, 卢锋1, *, 仇文革1   

  1. (1. 西南交通大学交通隧道工程教育部重点实验室, 四川 成都 610031; 2. 蒙西华中铁路股份有限公司, 北京 100073)
  • 收稿日期:2017-11-02 修回日期:2018-02-07 出版日期:2018-02-20 发布日期:2018-03-19
  • 作者简介:王刚(1989—),男,江苏徐州人,西南交通大学桥梁与隧道工程专业在读博士,研究方向为隧道大变形机制及控制。Email: swjtu_wg@163.com。*通信作者: 卢锋, Email: fenglu@my.swjtu.edu.cn。
  • 基金资助:

    蒙西华中铁路股份有限公司资助项目(ZSKY201601001-1); 国家自然科学基金资助项目(U1434206, 51678497)

Experimental Study of Mechanical Effect of 8shaped Diagonal Bar of Lattice Girders

WANG Gang1, MA Zhaofei2, LU Feng1, *, QIU Wenge1   

  1. (1. Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University, Chengdu 610031, Sichuan, China; 2. MengxiHuazhong Railway Co., Ltd., Beijing 100073, China)
  • Received:2017-11-02 Revised:2018-02-07 Online:2018-02-20 Published:2018-03-19

摘要:

在山岭隧道复合式衬砌施工中,格栅钢架被广泛应用。为研究8字结形格栅钢架腹筋的力学作用,采用模型试验方法,设计一系列格栅钢架试件,系统地研究腹筋直径和焊缝长度对格栅钢架的力学作用影响。研究结果表明: 1)随着8字结腹筋直径的减小,喷混凝土格栅钢架极限承载力基本没有降低,但优化指数大幅度增大; 2)对于腹筋直径,只需满足格栅钢架加工、存放、运输和安装过程中主筋架立和固定的要求即可; 3)主腹筋焊缝长度的减小对格栅钢架的承载力基本没有影响,但可以大幅降低格栅钢架的制作成本。

关键词: 隧道, 格栅钢架, 腹筋直径, 焊缝长度, 模型试验

Abstract:

The lattice girder is widely used in the construction of composite lining of mountaincrossing tunnel. In order to study the mechanical effect of 8shaped diagonal bar of lattice girder, a series of specimens are designed and the mechanical influence of diagonal bar diameter and welding length on lattice girder are studied. The results show that: 1) The capacity of the lattice girder does not reduce with the decrease of the diagonal bar diameter, while the optimization index increases substantially. 2) The diameter of diagonal bar should meet the requirements of fabrication, storage, transportation and installation of lattice girder. 3) The reduction of the welding length, which can reduce the manufacturing cost of lattice girder, affects the capacity of lattice girder little.

Key words: tunnel, lattice girders, diameter of diagonal bar, welding length, experimental test

中图分类号: