• 中国科学引文数据库(CSCD)来源期刊
  • 中文核心期刊中文科技核心期刊
  • Scopus RCCSE中国核心学术期刊
  • 美国EBSCO数据库 俄罗斯《文摘杂志》
  • 《日本科学技术振兴机构数据库(中国)》
二维码

隧道建设(中英文) ›› 2023, Vol. 43 ›› Issue (S2): 246-251.DOI: 10.3973/j.issn.2096-4498.2023.S2.028

• 研究与探索 • 上一篇    下一篇

纵向力对快速连接件管片环缝剪切性能影响研究

罗旭1, 秦楠2, 叶宇航1 2, 高学奎3, 徐文田1, 柳献2 *   

  1. 1. 广州地铁设计研究院股份有限公司, 广东 广州 510010; 2. 同济大学土木工程学院, 上海 200092; 3. 民航机场规划设计研究总院有限公司, 北京 100029
  • 出版日期:2023-12-30 发布日期:2024-03-28
  • 作者简介:罗旭(1985—),男,湖南娄底人,2009年毕业于清华大学,工程力学专业,硕士,高级工程师,现从事轨道交通地下结构设计和研究工作。E-mail: 113129088@qq.com。*通信作者: 柳献, E-mail: xian.liu@tongji.edu.cn。

Influence of Longitudinal Force on Shear Performance of Segment Circumferential Joints of Quick Connectors

LUO Xu1, QIN Nan2, YE Yuhang1, 2, GAO Xuekui3, XU Wentian1, LIU Xian2, *   

  1. (1. Guangzhou Metro Design and Research Institute Co., Ltd., Guangzhou 510010, Guangdong, China; 2. College of Civil Engineering, Tongji University, Shanghai 200092, China; 3. Civil Aviation Airport Planning and Design Research Institute Co., Ltd., Beijing 100029, China)

  • Online:2023-12-30 Published:2024-03-28

摘要: 为明确“平接头+快速连接件”新型管片环缝抗剪性能,设计不同纵向力工况下的环缝抗剪室内试验,通过对环缝剪切试验现象及荷载-错台曲线分析该新型环缝抗剪机制,得到不同纵向力对环缝抗剪的影响规律、同阶段环缝抗剪刚度及环缝承载力。主要结论如下: 1)相比传统“平接头+斜螺栓/弯螺栓”环缝,该类型环缝在发生错台时,快速连接件可及时发挥抗剪作用,能有效抑制环缝错台; 2)由于环缝弹性阶段抗剪刚度远大于塑性阶段,在隧道施工运营过程中,为保证文中尺寸的快速连接件管片环缝的抗剪性能,可将错台量控制在5.51 mm内。

关键词: 管片环缝, 剪切性能, 纵向力, 快速连接件, 盾构隧道

Abstract: To explore the shear resistance of the "flat joint + quick connector" type segment circumferential joints, indoor tests are designed on shear resistance of segment circumferential joints under various longitudinal forces. The shear resistance mechanism of such segment circumferential joints are analyzes via test results and loaddislocation curves, obtaining the influence patterns of longitudinal force on the shear resistance of circumferential joints and the shear stiffness and the bearing capacity of the circumferential joints at the same stage. Conclusions are drawan as follows: (1) The quick connectors of the recommended circumferential joints can effectively control the dislocations, which is superior to convational "flat joint + nclined/curved bolt" type segment circumferential joints. (2) The shear resisitance of circumferential joints is far lager in elastic stage than plastic stage, thus it is recommended to control the dislocation within 5.51 mm to guarantee the resistance of circumferential joints.

Key words: segment circumferential joints, shear properties, longitudinal force, quick connectors, shield tunnel