Development of Parameterized Modeling System of Cutter Heads  of Shield Machines

doi:10.3973/j.issn.1672-741X.2012.02.002

Tunnel Construction ›› 2012, Vol. 32 ›› Issue (2): 142-145.DOI: 10.3973/j.issn.1672-741X.2012.02.002

• wenzhang • Previous Articles Next Articles

Development of Parameterized Modeling System of Cutter Heads of Shield Machines

HAN Weifeng, LI Fengyuan, WANG Zhufeng

(State Key Laboratory of Shield Machine and Boring Technology, China Railway Tunnel Group, Zhengzhou 450001, China)

Received:2011-11-28 Revised:2012-03-05 Online:2012-04-20 Published:2012-05-03

Abstract

Abstract: The parameterized modeling technology for cutter heads of shield machines by means of CATIA 3D modeling software and Visual Basic software is described. The parameterized modeling system of cutter heads of shield machines is developed on basis of the parameterized modeling technology. The model of the cutter heads of shield machines can be rapidly formed by means of the parameterized modeling system and on basis of the boundary parameters, material parameters and cutter head parameters of the shield machines. In this way, the design cycle of the cutter heads is shortened and the working intension of the designers is reduced.

Key words: shield machine, cutter head, parameterized modeling, Visual Basic, CATIA

HAN Weifeng, LI Fengyuan, WANG Zhufeng. Development of Parameterized Modeling System of Cutter Heads of Shield Machines[J]. Tunnel Construction, 2012, 32(2): 142-145.

[1]	SUN Zhenchuan, LI Fengyuan, CHU Changhai. Analysis Method of Correlation between Shield Tunneling and Geology Based on Big Data [J]. Tunnel Construction, 2020, 40(2): 162-169.
[2]	QIN Dongchen， ZHOU Peng. Analysis of Sunk Volume in Shield Construction Process Based on Su AI Channel Project [J]. Tunnel Construction, 2018, 38(S2): 7-15.
[3]	XU Zan, XU Zhengshuai, CHEN Xianzhi, XU Xing, GU Zhanghe. Research on Construction Support Scheme of  Superstructure of Opencut Subway Station under the Condition of Shield Machine Driving through a Station [J]. Tunnel Construction, 2018, 38(S2): 303-309.
[4]	HUANG Tao, LIU Quansheng, HUANG Xing, ZHANG Xiaoping, LU Xinjing. Research and Development of RealTime Monitoring System forScraper Wear and Laboratory Verification Experimental Test [J]. Tunnel Construction, 2018, 38(S2): 364-373.
[5]	ZHENG Yongguang, XUE Guangji, CHEN Jinbo, PANG Wenzhuo. Development, Application and Prospect of Technology of Specialshaped Boring Machine in China [J]. Tunnel Construction, 2018, 38(6): 1066-1078.
[6]	WANG Xiaodong, YU Gang, WU Huiming. Application of Parameterized Modeling of Shield Segment Based on Revit [J]. Tunnel Construction, 2018, 38(2): 249-254.
[7]	YANG Yuan, WANG Chunsong. Driving Control Technology for Active Articulated Shield Machine in  Moderately Weathered Mudstone in Continuous Small Radius Curve [J]. Tunnel Construction, 2017, 37(S1): 189-193.
[8]	LI Dongli, SUN Zhihong, REN Dezhi, SUN Wei. Study of Application of Eddycurrent Sensor to Disccutter Wear  Monitoring System of Shield Machines [J]. Tunnel Construction, 2016, 36(6): 766-770.
[9]	SUN Zhihong, LI Dongli, ZHANG Jianian. Wireless Realtime Disc Cutter Wear Monitoring System for Composite Shield Machine [J]. Tunnel Construction, 2016, 36(4): 485-489.
[10]	GUO Weishe. Reflecting on Technologies for Shield Tunneling in Heterogeneous Ground [J]. Tunnel Construction, 2016, 36(10): 1196-1201.
[11]	LIU Jia, WU Dexing, GAO Xiang. Study on Options of Guanmen Subsea Tunnel in Zhoushan [J]. Tunnel Construction, 2015, 35(S2): 57-62.
[12]	ZHANG Meng， SUN Cheng. Technologies for Largediameter Earth Pressure Balance Shield Boring in Complex Strata [J]. Tunnel Construction, 2015, 35(S2): 157-161.
[13]	HAN Weifeng, CHEN Kui, ZHANG Bing. Verification Analysis on Design of Shield Cutterhead under Abruptchanging Loading Conditions [J]. Tunnel Construction, 2015, 35(9): 957-961.
[14]	WU Hebei, GUAN Huisheng, ZHANG Yu. Shield Type Selection and Key Parameter Calculation:  Case Study on Shield Machine for South Railway StationShenxianshu  Station Section on Line 7 of Chengdu Metro [J]. Tunnel Construction, 2015, 35(2): 191-196.
[15]	CHEN Xiangsheng. Several Key Points of Artificial Ground Freezing Method and  Its Latest Application in China [J]. Tunnel Construction, 2015, 35(12): 1243-1251.

Development of Parameterized Modeling System of Cutter Heads of Shield Machines

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments