ISSN 2096-4498
CN 44-1745/U
Tunnel Construction ›› 2018, Vol. 38 ›› Issue (3): 474-480.DOI: 10.3973/j.issn.2096-4498.2018.03.016
Previous Articles Next Articles
CUI Yin, HE Fei, QI Zhichong, HE Kaiwei
Received:
Revised:
Online:
Published:
Abstract:
The cutterhead is the key component of fullface hard rock tunnel boring machine(TBM). The layout of the disc cutters is the key process in design of TBM cutterhead, which directly influences the cutterhead performance. Based on two kinds of disc cutter layout schemes for TBM, the influence of different layouts of disc cutter on the mechanical properties of TBM cutterhead is analyzed. From the aspect of the overall force balance of disc cutter, the radial unbalance force and overturning moment of the disc cutter group of the two schemes are compared. From the aspect of local deformation and stress distribution of the cutterhead, a new evaluation index of the cutter distribution density is proposed, and the correlation analysis is carried out with the finite element calculation results of the cutterhead. The study results show that: 1)The disc cutter distribution density is an effective index to evaluate the quality of the cutter layout. 2)The supporting ribs affect the cutterhead mechanical performance significantly. 3)Stochastic layout pattern of disc cutter is better than the doublecrosstyped layout pattern.
Key words: TBM, cutterhead, disc cutter, doublecrosstyped layout pattern of cutter, stochastic layout pattern of cutter, distribution density of cutter
CLC Number:
U 455.3
CUI Yin, HE Fei, QI Zhichong, HE Kaiwei. Comparative Analysis and Evaluation of DifferentDisc Cutter Layout Schemes for TBM[J]. Tunnel Construction, 2018, 38(3): 474-480.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.suidaojs.com/EN/10.3973/j.issn.2096-4498.2018.03.016
http://www.suidaojs.com/EN/Y2018/V38/I3/474
Key Technologies of Cutterhead Configuration and Cutter Replacement for Large diameter Shield under High Water Pressure
Design and Analysis of a New TBM Propulsion System with Small Turning Radius
Dynamic Model and Vibration Analysis of TBM Edge Disccutter Based on MATLAB/Simulink